Power Steering Pump Hardware Bolt Sizes?

[Sixty7Restomod]

The fun of struggling with manual steering is over for me . I'm converting back to power steering. I have everything ready for the install but seem to have misplaced the mounting bolts for the power steering pump.
I checked out a couple sites, Mustangs Plus, CJ Pony parts, etc. The hardware kits are around $20. Are there something special about these bolts? Is it possible just to head over to home depot for em and if so anyone know the sizes for them?

 

[2+2GT]

You could use generic Grade 5 bolts if you want, with lockwashers it'd be almost as good as OEM.

They wouldn't be the same hollow head integral serrated washer bolts as original, though.

View attachment 234664

When I take things apart, I keep Ziplock Freezer Storage Bags and a black Sharpie handy for fasteners and small parts. Never fails.

 

[Sixty7Restomod]

Great, thanks! I'm usually pretty good at keeping track of parts but I'm definitely gonna grab some ziplock bags now.

 

[2+2GT]

One thing though, the catalog I have here shows the PS pump hardware kit at $10, which IIRC includes the large stud, not something you can get generically. As for the rest, the hardware store will charge you the better part of $10 for generic stuff, I'll bet.