• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Powerslot -vs- Brembo Rotors -vs- Cheap-O's

  • Thread starter Thread starter 2002GreyGT
  • Start date Start date Feb 3, 2006
Prev
  • 1
  • 2
First Prev 2 of 2
2

2002GreyGT

Member
Jun 10, 2003
481
0
16
Raleigh, NC
Feb 7, 2006
#21
  • Feb 7, 2006
  • #21
tomustang, I have the pads that came with the brake upgrade package, I think they are extreme 911 or something.

I used to have a set of Hawk HPS before I upgraded the brakes, and I had the same experience as san~man with noise and tons of dust.

I think I might try some Greenstuff pads this time, but I have not made my mind up yet. any Opinions?

~K
 
2

2002GreyGT

Member
Jun 10, 2003
481
0
16
Raleigh, NC
Feb 7, 2006
#22
  • Feb 7, 2006
  • #22
I did some more testing with my brakes and this is what I am seeing / feeling.

Highspeed braking like comming off the highway and stopping for a light (70-0) with mediam pressure I barely feel any shake, and what I feel is probably the great roads we have here in NC.

Low speed braking like slowing down for a light on back roads (40-0) with LIGHT pressue, I can feel a kind of pulsing. It seems to be timed with what I am guessing the rotation of the tire. When I hold the pedal still it is almost rhythmic and its very noticeable.

Would a truely warped rotor show shaking at highspeed braking too?

Could this be a seperate problem or something?

~K
 

BLK_ROUSH

Founding Member
Feb 5, 2000
1,300
0
36
Newnan, GA
Feb 7, 2006
#23
  • Feb 7, 2006
  • #23
HoustonGT said:
Is PowerSlot a good company to go with as well?
Click to expand...

95K with no issues on the Stage 2. Powerslot has done well by me. Several pads later the rotors are good. I do plan to upgrade to Brembos on the Stage 2.

2002GreyGT,
I would think that if the rotor is truly wrapped it's impact would be felt at high speed also, but with a noticable difference in braking difference too. Peace of mind is priceless .... I'd advise new rotors and inspect your current ones.
 

COramprat

...I can take it. I think.
20+ Year Stangneter
Mar 2, 2003
8,474
1,463
223
Sea of Tranquility
Feb 7, 2006
#24
  • Feb 7, 2006
  • #24
Anyone seen the Powerstop brand? Is that just a knock-off of the Powerslots?
 

Methodical

15 Year Member
Dec 1, 2003
1,192
11
59
Clinton, MD
May 15, 2006
#25
  • May 15, 2006
  • #25
san~man said:
...Now, on to the Hawks. Read some reviews on Tire Rack about them, and most said that the pads were loud. Against my better judegment, I ordered them anyway and regretted every minute of it. They squealed like DAMN HELL everytime I came to a stop, so much to the point that it was embarrasing. I replaced them with the factory pads that came with the Bullitt calipers and although it "seemed" to lose some stopping power, NO noise at all. Promptly threw the Hawk pads in the trash...Good luck.
Click to expand...

Why didn't you send them back? I had some and they squealed like pigs. I called the company and shipped them back and they shipped me the next lower brake paks.
 
S

san~man

O-G
Founding Member
Nov 29, 1999
8,546
3
78
A little grass shack on a big lava rock
May 15, 2006
#26
  • May 15, 2006
  • #26
Methodical said:
Why didn't you send them back? I had some and they squealed like pigs. I called the company and shipped them back and they shipped me the next lower brake paks.
Click to expand...

Didn't even bother to try. I'm sure Tire Rack may have done that, but I was too angry to try.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,260
17,944
224
Massachusetts
May 15, 2006
#27
  • May 15, 2006
  • #27
Wow, guess guys are using the search feature more often now.

This is aout the 4th or 5th old thread i'm subscribed to to pop back up again
 

Cantslowdown

New Member
Jun 20, 2004
502
1
0
Mt.Home AR!
May 15, 2006
#28
  • May 15, 2006
  • #28
I have a set of decla rotors coming i am getting them at a good price i am going to try them out hope they work good..
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,260
17,944
224
Massachusetts
May 15, 2006
#29
  • May 15, 2006
  • #29
How much is Autozone selling the Decla rotors for?

I wonder how they rank compared to the Eradispeed 1 and 2 peice rotors
 

CRZYHRSGT

New Member
Feb 14, 2004
240
0
0
5.7 miles north of THE Ohio State University
May 15, 2006
#30
  • May 15, 2006
  • #30
I've got the OE pads with the Bullitt kit as well as Powerslots and love 'em. I talked to a buddy at Tire Rack about the difference between the Brembos (always a fav. of mine) and the Powerslots. The PS come coated so that there is no rusting on non brake surfaces (unlike Brembo). He went on to tell me that he has PS on his Impala SS and his wife's Suburban without any warp issues (if anything would warp cheap rotors it'd be big honkers like those). After MUCH abuse I like the combo.

I also have to agree on the Hawks...my last setup had those at all 4 corners and ooooo did they make some noise.
 

04gtdrop

New Member
Jun 10, 2005
532
0
0
Sac, CA
May 15, 2006
#31
  • May 15, 2006
  • #31
ok, i have to jump in here.... i have a 2004 gt. a few months back i up graded to bullet calipers up front with a 13 inch cross drilled AND slotted rotor with hawk pads. I cant remember the name of the rotors. They were cheapo's though...not brembo or anything like that.


Now they are warped (i think) and i am going to replace them. I know what ABS feels like and i am having the same problem as someone else in the this thread.. at higher speeds about 50 mph and above if i use my brakes i feel a shaking in the pedal, steering wheel and the rest of the car. It does not happen when i brake from 45 or less.

I just ordered a new set of front rotors and pads. I have a rear set of cobra rotors and calipers sitting at home.

I just need to get rear pads and steel lines for up front and i will be good to swap everything out.

I must say that when i did get the new calipers and rotors on up front (a few months ago) i felt a HUGE diff. they stopped me way better than the stock brakes.

I tend to brake hard alot. I dont know if the warping is due to my heavy braking habbits or due to me leaving the rears stock....but either way you will like your new brakes.

Just make sure to get zinc plated rotors, i didnt the 1st time and they rusted. It looks like crap IMO. But i would go with the higher quality parts if i were you....you know what they say "you get what you pay for".

Sorry for the long responce, but just had to throw in my .02 cents.


p.s. i heard that if you are going to upgrade your rear brakes to a bigger size like to 11 inch cobras, you need some kind of kit from ford. It has a special bracket that puts the caliper in the right spot.

hope this helps
 

Cantslowdown

New Member
Jun 20, 2004
502
1
0
Mt.Home AR!
May 15, 2006
#32
  • May 15, 2006
  • #32
The decla rotors have a 3 year worranty so i dont think the should be too bad..
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,260
17,944
224
Massachusetts
May 15, 2006
#33
  • May 15, 2006
  • #33
04gtdrop said:
p.s. i heard that if you are going to upgrade your rear brakes to a bigger size like to 11 inch cobras, you need some kind of kit from ford. It has a special bracket that puts the caliper in the right spot.
Click to expand...


FMS M2300-M CObra disk kit $170 from summit
 

bullitt_2620

Member
Oct 11, 2005
91
0
6
San Diego, cali.
May 15, 2006
#34
  • May 15, 2006
  • #34
I put the brembo cross drilled rotors, (sport kit) on 2 different cars, the bullitt and my old integra, and have had no problems with warping at all. I had brembo pads that came with the rotors on the integra and they were good, but REALLY dirty. Now I have Raybestos QS-quiet stop pads, they are nice, and clean. Neither were noisy, plus the gold zinc plated brembos look killer... Found at tirerack.
 

Built98GT

New Member
Oct 17, 2005
211
0
0
OKC
May 15, 2006
#35
  • May 15, 2006
  • #35
HoustonGT said:
Is PowerSlot a good company to go with as well?
Click to expand...

I put powerslot on my camaro i use to have because the shop i bought them from told me brembo made them. maybe........ maybe not. They were the best feeling breaks i have ever felt personally.Im sure there are much better out there though.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
830
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
196
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
For Sale 3-owner 1987 Mustang GT, $18K obro, Lancaster CA
  • Bill Cool
  • Oct 6, 2024
  • Fox Body Mustangs For Sale (1979-93)
Replies
4
Views
2K
Fox Body Mustangs For Sale (1979-93) Oct 13, 2024
nickyb
S
Brakes Brembo Cadillac ATS 4 Piston Calipers
  • Swhitney
  • Jun 12, 2022
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
46
Views
24K
Fox 5.0 Mustang Tech Jul 27, 2022
Swhitney
S
T
Need advice: 93 Cobra audio upgrade with no permanent modifications
  • THNX SVT
  • Feb 18, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 20, 2024
TIGGER
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?