• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Premium sound in A 93 hatch

  • Thread starter Thread starter 5.0Droptop
  • Start date Start date Dec 23, 2007
Prev
  • 1
  • 2
First Prev 2 of 2
R

RoyalFoxLX

Member
Apr 14, 2019
15
3
13
Fort Bragg, NC
Jun 14, 2019
#21
  • Jun 14, 2019
  • #21
Olivethefet said:
I'm not looking at a wiring diagram so take this for what its worth. If the fuses are all good it sounds to me that there is a break in the wire somewhere. I know that sounds obvious. If it was me I'd start checking continuity from the fuse block to the end of the radio harness. There are some great wiring diagrams on here that will help out. I'll look for one when I get to a computer.
Click to expand...


It's just odd. I had a radio in it not that long ago and it worked fine. It's been in storage for a while now and nothing has changed, I tried both the amp wiring behind to radio to hook it up and the 2 flat L plugs along with hooking the flat L plugs into the flat rectangle plugs with amp unplugged and plugged in. Nothing. Maybe my radio is dead idk.. find it hard to believe as it's only 2 years old and has been sitting in storage inside the car..
 

Olivethefet

I will own your nuts! LOL
5 Year Member
May 17, 2018
2,596
1,790
143
Enterprise AL
Jun 14, 2019
#22
  • Jun 14, 2019
  • #22
Have you tried running a fused wire from either the fuse block or off the battery to supply power to radio? That would tell you if the radio was bad.

Here are a couple of pics of wiring diagrams that I found. They are for a 92 though.



 
R

RoyalFoxLX

Member
Apr 14, 2019
15
3
13
Fort Bragg, NC
Jun 14, 2019
#23
  • Jun 14, 2019
  • #23
Olivethefet said:
Have you tried running a fused wire from either the fuse block or off the battery to supply power to radio? That would tell you if the radio was bad.

Here are a couple of pics of wiring diagrams that I found. They are for a 92 though.



Click to expand...
I dont know what that means lol, I'm gonna go get some jumper cable ends or some clamps and put the red and yellow on the positive side of battery and the black on negative and see if it boots up if not maybe my radio is bad
 
R

RoyalFoxLX

Member
Apr 14, 2019
15
3
13
Fort Bragg, NC
Jun 14, 2019
#24
  • Jun 14, 2019
  • #24
Tested the radio using a car battery and connecting the yellow and red wire to positive and black to negative and nothing. Getting power through the harness as well.. maybe all along this was a bad radio. Still is under warranty.. damn sonys... imma get a kenwood maybe today and see if it works(betting it will)
 

Olivethefet

I will own your nuts! LOL
5 Year Member
May 17, 2018
2,596
1,790
143
Enterprise AL
Jun 14, 2019
#25
  • Jun 14, 2019
  • #25
Thats basically what I was suggesting you do. I was trying to tell you how to do in a way that would protect the radio from accidentally being able to draw to many amps through a direct connection to the battery.

This is what I meant by fused wire.



I've accidentally burned stuff up hooking it straight to the battery.

At least now you know that the radio is the problem or at least part of the problem!
 
Reactions: RoyalFoxLX
R

RoyalFoxLX

Member
Apr 14, 2019
15
3
13
Fort Bragg, NC
Jun 14, 2019
#26
  • Jun 14, 2019
  • #26
Olivethefet said:
Thats basically what I was suggesting you do. I was trying to tell you how to do in a way that would protect the radio from accidentally being able to draw to many amps through a direct connection to the battery.

This is what I meant by fused wire.



I've accidentally burned stuff up hooking it straight to the battery.

At least now you know that the radio is the problem or at least part of the problem!
Click to expand...
Hopefully my kenwood I get is good. This radio hasn't booted up since I went overseas so who knows.. kinda pissed but it's still under warranty..
 
R

RoyalFoxLX

Member
Apr 14, 2019
15
3
13
Fort Bragg, NC
Jun 27, 2019
#27
  • Jun 27, 2019
  • #27
Wanted to give an update. Turns out the radio was bad, sony gave me a full refund and I went and bought a cheap kenwood radio. I used the two flat female plugs that went from the radio harness and plugged those into the two rectangle male plugs on the main body side and everything works!

So basically to sum it up on a a premium sound 93 car, just unplug the amp harness from the main body harness(should be two Male plugs that I used plugged into 2 female flat connectors, and bam, everything will work! Sound and all! Thanks for the help guys.
 
Reactions: Olivethefet and General karthief
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

Progress Thread 93 LX father son project
  • ZAM93LX
  • Oct 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 3, 2025
Scrapla347
K
Resolved Weird sound coming from a freshly rebuilt 5.0L
  • karhoot
  • Jun 24, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
198
Fox 5.0 Mustang Tech Jun 27, 2026
Mac131
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
122
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
T
Need advice: 93 Cobra audio upgrade with no permanent modifications
  • THNX SVT
  • Feb 18, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 20, 2024
TIGGER
A
Electrical New O2 sensor harness has no jumpers (91/93)…
  • afjLX
  • Dec 11, 2024
  • Fox 5.0 Mustang Tech
Replies
4
Views
418
Fox 5.0 Mustang Tech Dec 13, 2024
afjLX
A
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?