I put a pro-m meter on my car. I got it from a buddy that passed away so i cant really ask him what i need to know. but I just put 30# inj and that meter that says its for 30# inj on the car. On the meter it says elbow. I am running an elbow into my fenderwell to the filter if that is what it is refering to?????. But I Put a 75 MM TB on Trickflow Trackheat, and 1" spacer. I was running street heat with 70TB and 24's. Check engine light is on. I havent tried to pull codes yet. Figured id ask on here first. But i took the car down the street slowly cuz i have no brakes, and jus got into it a little and around 3000-3500 under load the car stutters bad. Think meter might have something to do with it.?? Is that meter suppose to be a certain way?? (not air flow direction, im saying like should it be turned to its side) Also why i am asking questions ... On my throttle body I plugged off the front, the place where the stock line runs from the valve cover breather to the throttle body. Would that have something to do with it?? Thanks