Procharger power pipe

DanG · Sep 8, 2011

Anyone using the AFM Procharger power pipe for the P1/D1 head units? Looks like a fairly nonrestrictive piece which could yield a decent gain for the price, particularly if a hood is actually a cowl hood with the opening at the rear.

13. Forced Induction Power Pipe®

VibrantRedGT · Sep 8, 2011

Not many Companies make driver side mount power pipes. AFM is one of the best, I'd buy it for that price.

DanG · Sep 8, 2011

VibrantRedGT said:
Not many Companies make driver side mount power pipes. AFM is one of the best, I'd buy it for that price.

I agree. It does look pretty good and fairly non-restrictive. It certainly beats the heck outta the stock conical filter which gets smashed against the AC lines.

VibrantRedGT · Sep 8, 2011

Consider I bought a UPR Power Pipe made out of plastic for $105. The AFM is polished and only $24 more, I would have bought the AFM hands down. Get it, buy it now.

ProKiller · Sep 9, 2011

do it

Rick 91GT · Sep 11, 2011

The AFM pipe works well and at $124 for the Procharger pipe its a good deal. Where do you have your IAT sensor located Dan?

The UPR pipe above only works for pass mount set-ups Vortech and Paxton, and at under $120 is a great deal since the AFM unit is near double at $230, and I have found the UPR doesnt get as hot being made out of the plastic.

DanG · Sep 12, 2011

Rick 91GT said:
The AFM pipe works well and at $124 for the Procharger pipe its a good deal. Where do you have your IAT sensor located Dan?

The UPR pipe above only works for pass mount set-ups Vortech and Paxton, and at under $120 is a great deal since the AFM unit is near double at $230, and I have found the UPR doesnt get as hot being made out of the plastic.

Hi Rick,

The IAT is in the last intercooler pipe about 16" away from the throttle body. Procharger has a bung welded into the IC tubing for this sensor.

DanG · Sep 13, 2011

I spoke with one of the tech's at AFM regarding this power pipe. They mentioned that they don't think there will be enough clearance with a cobra R hood with a 3" raise, which mostly occurs in the center. Therefore, I'm not certain what hood they recommend. hmm

Procharger power pipe

DanG

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

DanG

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

Attachments

ProKiller

Rick 91GT

Mustang Master

DanG

DanG

Similar threads

Procharger power pipe

"STANGNET'S PENGUIN SMACKER"

"STANGNET'S PENGUIN SMACKER"

Attachments

Mustang Master

Similar threads

Privacy & Transparency

Privacy & Transparency