Professional Products 4.6L 99-04 Manifold.

Fitment issues, is the $$ worth the hp gain, if any. Couple other things.

BUMP!

Anyone seen any other dyno tests on this intake other than what MM&FF did?
They posted a gain of 25HP.

Thanks

They posted 25hp gain.. with tb/plenum on a fully built high-compression motor with cams, heads, etc etc... In all reality it gained about 7rwhp.. totally NOT worth the money

Ohh wow a new intake for the 4.6 I bet it will be released on time.

On a stock motor you wouldnt see big gains just have some bling under the hood thats all..

looks like blueovalindustries.com actually has then in stock

they haven't been released yet...i think someone would have posted getting one since alot of guys are on the waiting list supposedly.

Cantslowdown said:

On a stock motor you wouldnt see big gains just have some bling under the hood thats all..

Click to expand...

the only gain from this I see on a stock or close to stock car is the ability to tap the drivers side rear and install a fitting to allow coolant to flow back to the crossover in the front... or atleast connect it to the passenger side hose that goes to the heater core.

this will eliminate the 2 hot cylinders on the drivers side rear and allow you to run a more agressive tune. of couse a S/C or nitrous car would benefit greatly from that alone.

Very true..Mike I forgot all about that..

jasonh_86 said:

They posted 25hp gain.. with tb/plenum on a fully built high-compression motor with cams, heads, etc etc... In all reality it gained about 7rwhp.. totally NOT worth the money

Click to expand...

+1 I totally agree that for the gain it is NOT WORTH IT.
To bad it's made in China.

jasonh_86 said:

They posted 25hp gain.. with tb/plenum on a fully built high-compression motor with cams, heads, etc etc... In all reality it gained about 7rwhp.. totally NOT worth the money

Click to expand...

+1 I totally agree that for the gain it is NOT WORTH IT.
To bad it's made in China.