Progress Thread Progress Thread kinda stalled- looking to get it back going again!

7991LXnSHO · Dec 26, 2021

Rdub6 said:
Not much to report, but I think this decal I put on under the hood was a cool touch!

I like that a lot better than a fiberglass blanket.

Rdub6 · Dec 26, 2021

7991LXnSHO said:
I like that a lot better than a fiberglass blanket.

The squirrels got to that blanket before I bought it. Found the pieces under the upper intake when I took it off.

7991LXnSHO · Dec 26, 2021

Rdub6 said:
The squirrels got to that blanket before I bought it. Found the pieces under the upper intake when I took it off.

Dang rodents!
There is a place on the firewall of another project I have going that is supposed to have a strip of plastic covered yellow fiberglass mat over a few posts. (The firewall is right behind the rear seats in this car.)
A dang mouse got into it and hid under parts on the top of the engine. I think the test of the car stayed rodent free. The only practical replacement I have found is something like Dynamat. That’s too shiny. I hope the engine bay paint looks good enough to leave it uncovered and use Dynamat on the inside under the trim.
It would be a great place for a logo like this. Thanks.

Rdub6 · Jan 3, 2022

First flurries were falling today so I figured I may as well tear something apart.
These need a real good cleaning, so no time like the present.

I just need to decide whether to leave them aluminum, paint satin black, or paint to match my intake and valve covers....... or a little of each?

Potomus Pete · Jan 3, 2022

Aluminum looks good....You know that

Rdub6 · Jan 3, 2022

Potomus Pete said:
Aluminum looks good....You know that

It does for sure, but everything else is either black or red for the most part.
I like em all, just want to get the right balance in the engine bay.

Rdub6 · Jan 3, 2022

Rdub6 said:
It does for sure, but everything else is either black or red for the most part.
I like em all, just want to get the right balance in the engine bay.

What I really need is a nice set of Trick Flow aluminum heads....... that aluminum would look NICE!!!

Rdub6 · Jan 5, 2022

I’ll throw this here in my thread, but I just came upon this video on YouTube explaining exactly how our rear differentials work. I thought it was interesting.

View: https://youtu.be/WeLm7wHvdxQ

Rdub6 · Jan 18, 2022

Rdub6 said:
First flurries were falling today so I figured I may as well tear something apart.
These need a real good cleaning, so no time like the present.

I just need to decide whether to leave them aluminum, paint satin black, or paint to match my intake and valve covers....... or a little of each?

So, I ended up just cleaning everything up, and reinstalling. The tensioner started to get a little too much shine, but it’s better than grease.
I was able to clean up a lot on the front of the motor as well.
I want to be able to drive it if the road salt clears up at all, so wanted it back together. Now we pray for rain!!

derek1993 · Jan 18, 2022

Rdub6 said:
What I really need is a nice set of Trick Flow aluminum heads....... that aluminum would look NICE!!!

Same. Holding out for a top end kit, if they ever come back in stock...

Mustang5L5 · Jan 19, 2022

Those kits have been out of stock for a while. When they do come back, they sell in a matter of days. Guess a lot of folks are waiting on them so get ready to pull the trigger

Rdub6 · Feb 11, 2022

I promised myself I wouldn’t tear it down this winter...... and I haven’t.
I did have my brother come over the other day, and we got the hatch hinges changed out, so that was a step in the right direction. (sorry, no pics)
Can’t wait for the salt on the roads to be gone, and car show/meet season to begin!
So she sits and waits in the garage:

I did score that old school Ford Motorsport flag on eBay though.... that was cool!

Rdub6 · Mar 12, 2022

Not much going on lately, but I did buy some new lower windshield molding, and some lower splash shields (or whatever you call them).
Crappy, rainy day here so I’ll probably crawl under and get those on today.

Rdub6 · Mar 12, 2022

And they’re in!

Potomus Pete · Mar 12, 2022

Love that new car look. Those pieces are nice, and ready for the car show

Rdub6 · Mar 12, 2022

Potomus Pete said:
Love that new car look. Those pieces are nice, and ready for the car show

Thanks Pete! Once summer comes it’ll take a bit more cleaning to keep everything looking nice, but I’ll do my best!

Potomus Pete · Mar 12, 2022

How many miles on the rear end

General karthief · Mar 12, 2022

Potomus Pete said:
How many miles on the rear end

My godddd Pete, that's kinda personal don't ya think???

Potomus Pete · Mar 13, 2022

Oh no. I did it.

Potomus Pete · Mar 13, 2022

I am interested in how his gears worked out. Being the first time for him, and garage done makes it impressive. I would love to make an attempt at it since it is a big power improvement, and he saved probably six to eight hundred.

Progress Thread Progress Thread kinda stalled- looking to get it back going again!

wanna catch the space herp

So while I wait to figure out my rear end issues

wanna catch the space herp

So while I wait to figure out my rear end issues

I'm still waiting for the fully nude shots

So while I wait to figure out my rear end issues

So while I wait to figure out my rear end issues

So while I wait to figure out my rear end issues

So while I wait to figure out my rear end issues

Active Member

That is…until I whipped out my Bissell

So while I wait to figure out my rear end issues

So while I wait to figure out my rear end issues

So while I wait to figure out my rear end issues

I'm still waiting for the fully nude shots

So while I wait to figure out my rear end issues

I'm still waiting for the fully nude shots

wonder how much it would cost to ship you a pair

I'm still waiting for the fully nude shots

I'm still waiting for the fully nude shots

Similar threads

Privacy & Transparency

Privacy & Transparency