Project "Dedicated Service"

fivespeedsteed said:

its inbetween the wheels right? so however low it hangs will never matter because the wheels will pick it up. good progress so far. ive been im'in you but no response. do all mm k members do that and shove the wheels that far foward?

Click to expand...

exactly, only need to worry about running **** over, and every one of the MM units do that, mine is worse because i also have the forward offset wheels

well this weekend was totally ****, saturday took me 4 hours to get the car on the trailer cause my come along broke, sunday didnt get the subframes finished so i had to drop 80 bucks to get that finished, then on my way back from the welder i got a ticket for making a left turn onto my street since they had the left turn close, and its the only way to get their with a trailer, also while at the welder when i was strapping the car down i dislocated my shoulder, **** i need a vacation

progress today, but no pictures yet, got the engine to start and run under its own power, just started capping all the vacuum fittings that are no longer in use and the engine started to idle better and better, still can hear some leaks just can find where they are coming from i'll figure that out tomorrow when i fix the seat bracket on the drivers side

sub frames have been painted

Mustang5L5 said:

Nice! How long do you think until you are driving it?

Click to expand...

hopefully this weekend, i need to fix the drivers side left seat bracket, looks like someone tore it out of the car with the pair of vise grips, then i gotta get all the vacuum stuff capped off to get her to idle properly

been lazy about updating, anywho got the car running right, yay, and did some other stuff, not much time to go into detail right now so im just gonna post pics

stykthyn said:

is that your camaro? I miss mine horribly. I hope to be back into a T/A one day soon.

Click to expand...

no that happens to be a buddies, he was switching out his alternator, i'll own one some day after i get all the fords i want

Wow almost 2 weeks without an update well here ya guys go
Here is the hood pins finally installed and lined up right, comments are helpful




Boozyah bizzetchs torque arm torqued up and degreed waiting for the removal of the upper control arms
i know these arent the coolest pics to look at but im at the point where its just tightening and alining, little welding on the floor pans and the car should be ready to drive by the 23rd
oh and one more, took this one to make sure my batteries were good, and cause she rocks
View attachment 249269

ok just one more pic before i pack it up for the night

august 23rd hopefully

well i changed the drive date to about 5 min ago, and i took this just before the drive, still need to get the powersteering working, its like steering a car without a serpentine belt
PICT0034-2.flv video by ShaolinCrane - Photobucket

****, ok i fixed it