Project Red Head Mistress

94gtfreak

Active Member
Oct 19, 2008
412
4
39
your moms house
Well I finally got the time to start working on the stang. Figured it was time to start installing some of the parts from my sig and some others.
Heres what I have yet to install.
1. Flowtech fox shorty headers
2. Summit O/R H pipe
3. Flowmaster American thunder cat back (when it arrives)
4. King Cobra clutch
5. Adjustable cable and quadrant
6. Cobra bumper and ultra clear fogs
7. 18x9 front and 18x10 rear DD chrome bullitts

Already installed my 8k hid's
View attachment 269578


Here is what we have done so far
Bumper removed
View attachment 269579
l_d08c16cdad26485e836018fd0ef82de7.jpg


Front bumper core support and factory fog lights removed
l_4e6cbafcbc3c4d84b15848ae18be0785.jpg


Motor, Cai and upper strut bar removed
l_ce30fe3d31694ef2aad91ac0cd0efdae.jpg


No more dinky @$$ factory headers
l_fc7f249ddc0d44e590433b586914cf1f.jpg
 
Here is where I am at as of now. Hoping to get as much reinstalled as I can tomorrow.

Got the tranny dropped
View attachment 268761

Got the driveshaft dropped (still hooked into the tranny so no fluid loss)
View attachment 268762

Me and my buddy getting ready to drop the clutch
View attachment 268763

The pressure plate
View attachment 268764

King cobra on the left and my stock one on the right
View attachment 268765

My flywheel (doesn't look bad, no pitting or scratches)
View attachment 268766
 
not horrible... but when installing a clutch you should always resurface the flywheel to give the new clutch a good surface to brake in on and your clutch will last longer and grip better... Id also change the fluid in your trans... might as well while you have it out...
 
Chern_889: Thanks for info, and no the car didnt get wrecked. I just figured it would be easire to get under the car without major problem or getting greasy nasty fingerprints on my new bumper!

reddy351: Nope, just slapped on some brake cleaner and bolted on new clutch. :rlaugh: JK I didn't have a choice!!! Plus it was an easy $15 mod, 2 hours at the tranny shop and they were done!

Thanks for the compliments!