Pypes O/R X pipe installation question

[TheMaster]

I ordered a pypes o/r x a week and a half ago and just got it yesterday. I just opened that box and suprise no hardware! Not a big deal, I was woundering if anyone knew the size and length or approx size and length of the bolts included that attaches the two pieces of the X pipe together. Thanks in Advance

 

[Hoboattacker]

Call them and get your hardware. It should have came with the necessary hardware to install it. You shouldn't have to run to Home Depot/Lowes to get it to work.

 

[anticubicle]

I installed my Pypes O/R-H with the stock clamps. There should be two clamps on the actual X-Pipe that you can't remove.

 

[NotQuik]

but the pypes xpipe was 2 pieces....I think it was 5/16 bolts....if you do get your own hardware it can be either thread just get the matching nuts (I think they were nylock by maybe somebody can confirm)...also had 2 flat washers, and all of your stock nuts are used up at the collector.

 

[TheMaster]

Thanks I ended up getting my own hardware, I aslo had pypes send me out some but I just couldn't wait any longer. Thanks for everyones help!