Quality of abcexclusive hoods?

The Green GT · Mar 27, 2007

Im just wondering how well the fit and finish is on their hoods? Im going to more than likely order one real soon.

And how much is it to ship to a residential address usually?

Blackened302 · Mar 27, 2007

shipping for me was $150 on their body kit, so a hood shouldn't be that bad, i would hope.

the quality is pretty damn good, i'd say. i'm running their urethane body kit that has taken all the abuse i've drunkenly thrown at it and the hood lines up well (it just doesn't latch, but i think it's because i bought it used/damaged).

next build up, i'm definately buying ABC.

stprorolla49 · Mar 27, 2007

I have their cobra RR hood, and it does look nice, but it was somewhat of a pain to get to fit. I had to use fender washers under all 4 of the hinge holes to raise the hood up enough to sit flush with the fenders. I also had to grind down part of the inside of the hood where it sits over the edge of the headlight housing because it was contacting. It took a few hours of work, and it looks decent, but i know where all the blemishes are. I mean i cant complain, i got it for $200 used and its way better than the stocker. If i were to do it over, and i had the money, id probably buy a cervinis, but money was an issue because i was trying to get the car back together on a limited budget. That being said, if you get a good deal on a used one, and are willing to put a few hours into making it near perfect, then go for it, but for the $80 difference or so between the ABC new and the cervinis new, id get the cervinis. Just my 2 cents....

Heres a pic of mine. You can see where it doesnt sit perfectly where he drivers fender and the hood meet right over the headlight. The hood sits slightly lower.

The Green GT · Mar 27, 2007

Cervinis is like $200 more. I could almost get another hood for that much lol. And they dont have the one I want anyway.

I dont mind putting some work in it, but Im just wondering how much I should expect.

Has anyone bought from ABC recently?

gcomfx.com · Mar 27, 2007

stprorolla49 said:

Ouch... that's a ways off. How does it look at the cowl? I was thinking of going this route if my 96 Cobra hood won't fit over the new 331.

stprorolla49 · Mar 27, 2007

gcomfx.com said:
Ouch... that's a ways off. How does it look at the cowl? I was thinking of going this route if my 96 Cobra hood won't fit over the new 331.

its wierd, cause it lines up perfectly on the other side, and along the fenders, and even at the cowl...its not put on crooked, its just a flaw in the mold i guess...or the previous owner of the hood may have sanded it down a bit to get it to fit with his fenders which may have been lined up differently than mine....

See its pretty much perfect on the other side...

gcomfx.com · Mar 27, 2007

How does it look at the other end of the hood up by the cowl? I would have had to measure each side of the hood to see what was going on. I wonder how much the fender would have to be compromised to help it. Sigh... good price on it though.

Pokageek · Mar 27, 2007

I didnt evennoticeit was off at first. That car looks great otherwise. I like it. The paint job looks excellent!

OrangeMustangGt · Mar 27, 2007

my ghood fit pretty good...a few tweaks on the fenders, etc and its lined up good!
I would buy again!

The Green GT · Mar 27, 2007

A few tweaks on the fenders meaning that you had to use washers on the fenders, or on the side of the hood?

turbogt · Mar 27, 2007

Cervinis is far better, but here's my abc...

Cervini's

The Green GT · Mar 27, 2007

How high is the cowl on it?

And I know Cervinis will be better, but how good is the ABC?

Danman765432 · Mar 27, 2007

The Green GT said:
And I know Cervinis will be better, but how good is the ABC?

Haha...My cervinis lined up perfect the first time...just had to throw that out there

turbogt · Mar 27, 2007

Cervini's shipping is alot cheaper... I paid 175 from abc from texas to montana...
Cervini's was 130 from New jersey to montana...

The Green GT · Mar 27, 2007

That still makes ABC exclusive like $150 cheaper.

How big is the cowl on your hood turbogt? I want the 3 in one but I think the Cervinis one is a 2 in.

And I just had an epiphany. I think I might use the hood money to get those gears installed. Since all they are doing is collecting dust.

sage2k · Mar 27, 2007

dude, use the money that you would spend on a hood to get those gears installed!!
or get an intake manifold
or both
more horsepower first your car looks fine!

The Green GT · Mar 27, 2007

sage2k said:
dude, use the money that you would spend on a hood to get those gears installed!!
or get an intake manifold
or both
more horsepower first your car looks fine!

I was actually just debating that. lol

I tried to call my gear guy a few minutes ago and he didnt answer, so **** him. Im gonna call the Speed shop tomm and see how much they want.

stprorolla49 · Mar 27, 2007

Pokageek said:
I didnt evennoticeit was off at first. That car looks great otherwise. I like it. The paint job looks excellent!

thanks dude, yea theres a few things with the hood and the paint thast bug me, but if i dont mention it, nobody ever notices it...

turbogt · Mar 27, 2007

Which hood... The 95 has the 2000 cobra R style... I'm not sure how big it is, 2.5" maybe...
The 2000 has 3.5" lip... It's impossible to see the front of the car while sitting in it..

sn-95matt5-0 · Mar 27, 2007

how well do other abc parts fit i was thinking bout goin with their s351 wing when i repainted

Quality of abcexclusive hoods?

No 13 year olds are safe around me.

Active Member

Active Member

Attachments

No 13 year olds are safe around me.

Attachments

Active Member

Attachments

Active Member

Attachments

No 13 year olds are safe around me.

Member

Attachments

No 13 year olds are safe around me.

Member

Member

No 13 year olds are safe around me.

Member

No 13 year olds are safe around me.

Active Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency