Currently I am running an F-cam with stock HO pistons (4 valve reliefs) and E7 heads with 1.94/1.60 valves. With 1.6 rockers I have no clearance issues. have fun!
I'll agree that you should be just fine w/ that cam as far as clearance, but make sure that you're not using the original valve springs w/ the F-cam's lift. The clearance issues are a little different if the valves are hanging open when they shouldn't because the springs are worn out/inadequate. Crane makes a nice upgraded spring kit for the E7's that don't require any machine work if you're still on the stockers.
they've actually got dual valve springs already so i should be all right there.
dual springs doesnt mean they will be ok for the cam!