Question About Factory 2008 Jack

S

sparx

Member

Sep 2, 2009

369

1

19

Mar 19, 2014

#1

• Mar 19, 2014

• #1

I decided to hang on to my 2008 Bullitt after all. There was nothing that would be better at this time.

So knowing the inflation kit is no good, I picked up a dognut spare tire kit off Ebay. I did not, was suppose to, receive the instruction card so I have a question.

What the heck is this threaded hood that is attached to the scissors jack for? I have not come up with a solution so far. (There is a fender washer keeping the hood from falling out inside the "U" channel)

Sparx

View attachment 118418

View attachment 118419

View attachment 118420

 

Diode Dynamics

10 Year Member

Nov 29, 1999

912

64

69

St. Louis, Missouri

Mar 20, 2014

#2

• Mar 20, 2014

• #2

I believe that is screwed into another part of the spare tire kit to keep everything secure

Nick C.

 

05 black GT on 94

Member

Sep 21, 2013

11

1

14

Mar 21, 2014

#3

• Mar 21, 2014

• #3

Looks like the hook that holds down the spare tire. You have to take it off the jack.
Or the one that holds down the jack.

 

Last edited: Mar 21, 2014

S

sparx

Member

Sep 2, 2009

369

1

19

Mar 21, 2014

#4

• Mar 21, 2014

• #4

Yeah I see it there to the right of the main (larger) hooked bolt that runs through the center of the spare.
If I took it off the jack, how would it hold anything though?
TY for the image I appreciate it, at least I know how to put all the parts into the trunk well.
Jim

 

05 black GT on 94

Member

Sep 21, 2013

11

1

14

Mar 21, 2014

#5

• Mar 21, 2014

• #5

The one for the jack goes threw the jack and screws in the bottom of the trunk floor.

 

S

sparx

Member

Sep 2, 2009

369

1

19

Mar 21, 2014

#6

• Mar 21, 2014

• #6

Ok, so the small one on the right (the one I am inquiring about) is the one that holds the jack down to the car is what you are saying.

 

05 black GT on 94

Member

Sep 21, 2013

11

1

14

Mar 21, 2014

#7

• Mar 21, 2014

• #7

That's right sparx.

 

S

sparx

Member

Sep 2, 2009

369

1

19

Mar 21, 2014

#8

• Mar 21, 2014

• #8

That's right sparx.

Click to expand...

Ok thanks, tomorrow I swap out the compressor and put in the jack, tire , etc.
sparx

 

S

sparx

Member

Sep 2, 2009

369

1

19

Mar 22, 2014

#9

• Mar 22, 2014

• #9

Thanks to ALL posters for the help, got the jack tested, just to be sure I know where the jack points were, and the jack, spare tire, etc. mounted in the trunk where I hope it stays for as long as I own the Bullitt!


Sparx

 

rd

Founding Member

Jan 12, 2000

3,316

63

109

Ocean Springs MS

Mar 26, 2014

#10

• Mar 26, 2014

• #10

Jacks for the 2008 Bullitt are available at any pawn shop. Then wrap it in a towel and its good to go.