• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Question in regards to B303 Cam and setup...

  • Thread starter Thread starter 5.0 Kid
  • Start date Start date Aug 24, 2005
5

5.0 Kid

Founding Member
Jun 29, 1999
1,042
0
0
NY
Aug 24, 2005
#1
  • Aug 24, 2005
  • #1
I have a question for you all, hopefully you can help me out. I am looking at a 93 notch this weekend, and the guy stated it had a B303 cam in it. Now, he didnt say anything else like heads, or intake, or anything like that. But he also mentioned it had 24lb injectors in it.

First off, what does this all mean to you?

Secondly, this guy just bought the car for his wife he states but she doesnt like it. Wont know if this is BS or not until I see it and drive it, but wanted to see what you all thought in regards to the set up. Why would he have 24 lb injectors on it and just a cam? Is this bad? Is this a wrong setup? Should it have anything else to accompany this set up?

See, he doesnt seem like he knows much about cars, especially when I ask him to tell me about the car and he says, "well, the A/C works really well, it has power door locks and mirrors---"

Uhm, no, what does it have done, modifications man!
 
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Aug 24, 2005
#2
  • Aug 24, 2005
  • #2
he probably only knows what whoever sold him the car knew about it which doesnt sound like a whole lot
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
Aug 24, 2005
#3
  • Aug 24, 2005
  • #3
Who ever putthe B303 in it may have added the 24# injectors as a precautino against runnigh out of fuel. Don't hurt anything as long as the MAF is calibrated for them. Otherwise it'll run rich.

He probably doesn't really know what he has.
 
5

5.0 Kid

Founding Member
Jun 29, 1999
1,042
0
0
NY
Aug 24, 2005
#4
  • Aug 24, 2005
  • #4
Thats what I figure, hes probably going off what the other guy says.

By the way, TJ, I noticed your convert runs nice in the 1/4 mile, have anything good done to it? Thats a good time for a convert!
 

QDRHRSE

New Member
Dec 31, 2002
1,590
0
0
Palmdale, CA
Aug 24, 2005
#5
  • Aug 24, 2005
  • #5
You never know what a car has until you see it for yourself. Do you know how to ID a GT40 head? Every now and then you get lucky. I am pretty familiar with Mustangs and have bought cars, happily, and found them to have even more stuff after I've brought them home.
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
Aug 24, 2005
#6
  • Aug 24, 2005
  • #6
5.0 Kid said:
Thats what I figure, hes probably going off what the other guy says.

By the way, TJ, I noticed your convert runs nice in the 1/4 mile, have anything good done to it? Thats a good time for a convert!
Click to expand...

Don't want to go too far :OT: , but....

I have 3.73's
1.72:1 FRPP Rockers
B303 Cam
73mm C&L MAF
24lb Injectors
Trickflow Valve Spring Upgrade
King Cobra Clutch
Steeda Shifter
Had Weld Wheels (15x4 w165's & 15x8 w/275/50's) when it ran that time.
Stock T5
Stock Intake
Stock Throttle Body
Stock Heads
Stock Shortblock (besides cam)

And thanks for the compliment on my time. I did run an honest 100 mph trap speed once, but the time was a touch slower.
 
5

5.0 Kid

Founding Member
Jun 29, 1999
1,042
0
0
NY
Aug 24, 2005
#7
  • Aug 24, 2005
  • #7
tjm73 said:
Don't want to go too far :OT: , but....

I have 3.73's
1.72:1 FRPP Rockers
B303 Cam
73mm C&L MAF
24lb Injectors
Trickflow Valve Spring Upgrade
King Cobra Clutch
Steeda Shifter
Had Weld Wheels (15x4 w165's & 15x8 w/275/50's) when it ran that time.
Stock T5
Stock Intake
Stock Throttle Body
Stock Heads
Stock Shortblock (besides cam)

And thanks for the compliment on my time. I did run an honest 100 mph trap speed once, but the time was a touch slower.
Click to expand...

Ah, there it is, the B303 Cam w/24lb injectors! LOL Pretty moderate set up, no offense intended, I mean that respectively, awesome time!!
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
Aug 24, 2005
#8
  • Aug 24, 2005
  • #8
5.0 Kid said:
Ah, there it is, the B303 Cam w/24lb injectors! LOL Pretty moderate set up, no offense intended, I mean that respectively, awesome time!!
Click to expand...

For what little I've actually done, I'm quite pleased.
 
5

5.0 Kid

Founding Member
Jun 29, 1999
1,042
0
0
NY
Aug 24, 2005
#9
  • Aug 24, 2005
  • #9
tjm73 said:
For what little I've actually done, I'm quite pleased.
Click to expand...

Hell yeah, I would be too!
 

payupsucka

Member
Sep 28, 2003
324
0
16
Keeping it grimy in Fall river MA.
Aug 24, 2005
#10
  • Aug 24, 2005
  • #10
amazing what can happen when you can drive a car well me on the other hand lets not get into that
 
You must log in or register to reply here.

Similar threads

9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
843
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
J
Transmission
  • Jraesims
  • Mar 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
171
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 8, 2026
JD1964
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
772
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
J
Wheels-Tires Need Some Help - Brakes Upgrade/Wheel fitment
  • jaygee15
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
  • 3 4 5
Replies
81
Views
2K
Fox 5.0 Mustang Tech May 6, 2026
AeroCoupe
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
649
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?