Engine Question on the good 'ol Innova 3145 code reader?

[evintho]

Pulled codes on '93 5.0 and got 81,82,85,84. It cycled back and displayed the same codes again (as it should). Then, I got the 10 seperator code and the continuous memory codes came up. I pulled a 33 (EGR) and 66 (MAF). It cycled back and displayed the 33 again (as it should) but the 66 didn't appear the second time. Why didn't the 66 appear the second time? And yes, I waited long enough. A full 10 minutes after the second 33 code.

 

[Noobz347]

Make sure you weren't in the 'wiggle test mode' by accident.

Perform the test in the "wiggle test mode" on purpose.

Also, did you do the Dynamic Response Check?

 

[General karthief]

Make sure you weren't in the 'wiggle test mode' by accident.

Perform the test in the "wiggle test mode" on purpose.

Also, did you do the Dynamic Response Check?

WTF you talk'n 'bout Chester??

OP:
It would not go into 'engine running tests'?
Clutch in, ac off?

 

[Noobz347]

WTF you talk'n 'bout Chester??
It would not go into 'engine running tests'?
Clutch in, ac off?

If you look, it's easy to end up in 'Wiggle Test Mode' at the push of a button. Happened to me a time or two.

 

[General karthief]

If you look, it's easy to end up in 'Wiggle Test Mode' at the push of a button. Happened to me a time or two.

That should explain alot. but it don't