Question regarding COBRA intake bolts & spacer???

monte87

Founding Member

Feb 26, 2001

876

18

49

new york

Oct 18, 2004

#1

• Oct 18, 2004

• #1

Greetings guys!

I have a question regarding an 1/2 intake spacer FMS-M9486A52. I have a cobra intake, i was wondering are the bolts the same for the GT-40????
Becuase in the summit catalog, the part numbers state GT-40 and on 5.O resto-it states Cobra.GT-40, whats the deal? They both utilize the same FMS part #.
I always thought they were different.....

Many thanks-Anthony

 

Michael Yount

Mustang Master

Apr 10, 2002

9,039

6

79

Charlotte, NC

Oct 18, 2004

#2

• Oct 18, 2004

• #2

The GT40, Cobra and Explorer intakes all share the same lower intake manifold - with some minor differences for things like egr cooling return ports, and ACT sensor location. The thing to know is how many long bolts vs. short bolts. My Explorer has 2 short bolts (each end - passenger side), and 4 long bolts. I believe the Cobra is the same. Not sure about the GT40 upper since it has a tubular steel construction instead of cast aluminum.

 

NoSloCoupes

"I would do anything for a FREE muffler"

Founding Member

Mar 4, 2000

2,705

2

58

Clinton,IL

Oct 18, 2004

#3

• Oct 18, 2004

• #3

If your looking to buy one...i think i've got a 1/2" spacer laying around somewhere for the gt40/cobra. Save ya some dough...pm or email me if you're looking for one.

 

NYC LSC

Founding Member

Feb 16, 2001

626

0

0

Staten Island, NYC

Oct 18, 2004

#4

• Oct 18, 2004

• #4

Cobra uppers use 4 long bolts and 2 short ones.

The GT-40 uppers use 4 short bolts and 2 long ones.

Now hurry up and get that spacer off and give it to me - I've got a set freshly painted "Ford blue" valve covers waiting to go on now. lol

 

Michael Yount

Mustang Master

Apr 10, 2002

9,039

6

79

Charlotte, NC

Oct 18, 2004

#5

• Oct 18, 2004

• #5

"Cobra uppers use 4 long bolts and 2 short ones.

The GT-40 uppers use 4 short bolts and 2 long ones."

I kinda thought so....thanks for confirming.

 

monte87

Founding Member

Feb 26, 2001

876

18

49

new york

Oct 18, 2004

#6

• Oct 18, 2004

• #6

Thanks for your help-guys!

Thing is-

Summit racing and 5.0 resto both share the same part# M9486A52, But only 5.0 resto states its for a cobra as well. And being on the phone for about an hour and getting no-here-It seems they both have the same bolts (GT40),-which is for not for the cobra! But they list GT40/cobra-I believe that is a misrepresentation. WTF!!!!!!!!!!! i even called FMS and they dont have the bolts!! What a joke.
It seems the cobra intake gets no respect, but the GT40 has the bolts and all. What is it with 3/8 only and 1 inch-But no 1/2 from BBK & trickflow....

Ant

 

Thomas302

Member

Jan 9, 2004

119

0

16

Alamogordo, NM

Oct 18, 2004

#7

• Oct 18, 2004

• #7

I am using a GT-40 intake on my car with a 1" spacer, and I have two long bolts in the middle, and 4 short bolts front and back. Just buy the spacer, and if it has the wrong bolts, just run down to the local hardware store.

 

J

jaackal

New Member

May 12, 2003

402

0

0

NJ

Oct 18, 2004

#8

• Oct 18, 2004

• #8

i bought the spacer kit from 5.0 resto and it came with 2 long bolts, they are longer then the stock ones because of the spacer, i have a 1/2 inch spacer

 

monte87

Founding Member

Feb 26, 2001

876

18

49

new york

Oct 19, 2004

#9

• Oct 19, 2004

• #9

Hey Jackal.........

Hey-Jackal,

Thanks for reponding to my spacer post.

Did you buy the 1/2 cobra spacer from 5.0 resto, for a cobra intake??? Did you specify-COBRA and not GT40...
Were the bolts complete?

Cobra 4 long, 2 short....
GT40 2 long, 4 short....

Thanks-Anthony