Quick PTV ?

So I've been chasing down a coolant leak and found the lower intake the culprit. Since I've already got intake off and engine drained, I figured it won't be much more to tear rest of it down and install a new cam. It already has GT40-X305 heads and SVO intake and cam is all that's missing.

My question is, will a Comp Cam XE270hr (114 LSA) with .512 lift cause PTV issues?

The Comp Cam tech said he's seen some peeps have issues and some not. Not a real clear answer. Heads are the 58cc version, so I'm thinking it'll be close. I know I will have to measure, but before I go this route does anyone have experience or thoughts on this?

Thanks for any help,
Jay

Yeah I did a bit of research and everyone seemed ok with it, but every combo is different and I never did find anyone running the X305 heads with it. I was actually kinda surprised when I talked to the tech at Comp. First thing he said was that he had nothing that would work. Thanks for the reassurance, I could use all I can get.

J

Cool, thanks 5spdGt. You know, peak lift is all the cam tech talked about. Never overlap or even duration, which is why I had to question and ask for help.

By the way, the H/C/I write up in your sig was a big help as I was planning this project and I still refer to it often. Thanks for that,
Jay