Ramchargers Fan and Griffin Radiator People-I Need Some Help Quick

9

92GreenGT

PEAT

Founding Member

Jul 18, 2002

2,085

1

46

39

Big Stone Gap, VA

www.fullthrottleforums.com

Jul 3, 2004

#1

• Jul 3, 2004

• #1

Hey guys, I got my 31x19 radiator in the other day, so I mounted the fan to it yesterday and test fit the radiator and done all the possible things needed for it to fit in. I got it in but between my 6-rib crank pulley all the way up to my blower pulley I have less than a 1/4" clearance. How do you 8-rib guys make it fit? It looks like im going to be stuck with the 6-rib setup for the rest of my life. What did I do wrong or is this normal? Thanks guys. I can take pics if need be.

Dave

 

stangbear427

Active Member

Nov 11, 2002

2,401

1

49

New England

members.rankmyride.com

Jul 3, 2004

#2

• Jul 3, 2004

• #2

Pics are always good. This sounds strange- I don't have the Ramcharger (yet) but I've seen several pics of them installed, and there has always been several inches of clearance. How thick is your Griffin?

 

9

92GreenGT

PEAT

Founding Member

Jul 18, 2002

2,085

1

46

39

Big Stone Gap, VA

www.fullthrottleforums.com

Jul 3, 2004

#3

• Jul 3, 2004

• #3

stangbear427 said:

Pics are always good. This sounds strange- I don't have the Ramcharger (yet) but I've seen several pics of them installed, and there has always been several inches of clearance. How thick is your Griffin?

Click to expand...

I got a pic

hard to tell about it though, I will add it after I resize it. I have the same Griffin everyone told me to buy. The 31x19 from Jegs, cost $179.

Dave

 

9

92GreenGT

PEAT

Founding Member

Jul 18, 2002

2,085

1

46

39

Big Stone Gap, VA

www.fullthrottleforums.com

Jul 3, 2004

#4

• Jul 3, 2004

• #4

Should I be able to bring it on back to where it lines up even with the metal? I beat on the frame and moved the A/C lines over. I also reloacated the wires that were between it so those are out of the way. Guess I will take it back out and get a bigger hammer.

Dave

 

stangbear427

Active Member

Nov 11, 2002

2,401

1

49

New England

members.rankmyride.com

Jul 3, 2004

#5

• Jul 3, 2004

• #5

Wow. This is more what I'm used to seeing- also on a Griffin 31x19

 

stangbear427

Active Member

Nov 11, 2002

2,401

1

49

New England

members.rankmyride.com

Jul 3, 2004

#6

• Jul 3, 2004

• #6

How are your motor mounts?

 

9

92GreenGT

PEAT

Founding Member

Jul 18, 2002

2,085

1

46

39

Big Stone Gap, VA

www.fullthrottleforums.com

Jul 3, 2004

#7

• Jul 3, 2004

• #7

stangbear427 said:

How are your motor mounts?

Click to expand...

Brand new.

I guess I need to beat out the sides of the frame some more so it will sit in some more, but I dont see it happening. I'll do a search and see what everyone else had to do for clearance.

Dave

 

T

TheUser

Active Member

Jul 25, 2003

1,859

1

36

42

Springfield, MO

Jul 3, 2004

#8

• Jul 3, 2004

• #8

I have a simple - yet serious - question: What's wrong with it how it is? If nothing is rubbing, I see no negative side to leaving it how it is...am I missing something?

 

9

92GreenGT

PEAT

Founding Member

Jul 18, 2002

2,085

1

46

39

Big Stone Gap, VA

www.fullthrottleforums.com

Jul 3, 2004

#9

• Jul 3, 2004

• #9

TheUser said:

I have a simple - yet serious - question: What's wrong with it how it is? If nothing is rubbing, I see no negative side to leaving it how it is...am I missing something?

Click to expand...

Nope, your not missing a thing man. But I would like to have it sit back some more if possible, ya know the 6 rib isnt the best thing to have when your wanting to make boost. I guess I can live with it for now.

The 6-rib should be good to 8psi right? Thats all the boost I need anyways.

Dave