Rattle from under car while accelerating

stingeragent

New Member

Oct 16, 2004

33

0

0

Lubbock, Tx

Sep 26, 2005

#1

• Sep 26, 2005

• #1

A lot of the times, when I accellerate there is a metal rattling sound (only when im on the gas), sounding like its coming from underneath the car. It can make the whole car shake, and the acceleration slows down.

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

Sep 26, 2005

#2

• Sep 26, 2005

• #2

i would get under the car and start bangin on things till you find whats making the noise you hear.. most likely heat shields on your cats (if you still have them)


also you sure its not detonation?

 

94-302-vert

Active Member

Aug 16, 2004

1,947

2

36

NE CT

Sep 26, 2005

#3

• Sep 26, 2005

• #3

At what RPM's... I had a simmilar sound at p[artial throttle at less than 1500, and it drove me CRAZY until I realized it was jsut the way the flows sound at that RPM... Now I just drive above 1500 rpm all the time...

 

95COBRA241

New Member

Sep 3, 2005

339

0

0

Delray Beach, FL

Sep 26, 2005

#4

• Sep 26, 2005

• #4

I'd check to see if the universal joint in the driveshaft is going bad since the whole car shakes under load (acceleration).

 

18mustangs

New Member

Jun 8, 2005

533

1

0

Virginia Beach, VA

Sep 26, 2005

#5

• Sep 26, 2005

• #5

stingeragent said:

A lot of the times, when I accellerate there is a metal rattling sound (only when im on the gas), sounding like its coming from underneath the car. It can make the whole car shake, and the acceleration slows down.

Click to expand...

If it wasn't for the entire car shaking I'd say it souds like detonation\pinging. However as someone said check your driveshaft, and for good measure check your harmonic balancer too.
Tim

 

CManT1914

New Member

Feb 5, 2004

3,172

2

0

Killeen, Texas

Sep 26, 2005

#6

• Sep 26, 2005

• #6

No aftermarket mid-pipe huh? Darn, I was gonna say that. My MAC h-pipe used to rattle against the tranny crossmember until I wrapped it. But like Urban said, you can start hitting things (gently now!) to see if anything's loose. I just remembered, I had a bad rattling coming from under my car for a while. When I crawled under there to look around, I accidentally kicked my swaybar, and it was broken. Replaced it and no more rattle.

 

stingeragent

New Member

Oct 16, 2004

33

0

0

Lubbock, Tx

Sep 26, 2005

#7

• Sep 26, 2005

• #7

Im kinda leaning toward the universal joint idea. Anyway I can check to see if its going bad? Forgot to mention, it sometimes makes the noise when I turn or change lanes as well.

 

legalize420

Active Member

May 21, 2005

1,541

1

37

South Florida

Sep 26, 2005

#8

• Sep 26, 2005

• #8

i had the same problem. mine also made a clicking noise while rolling to a stop. driveshaft

 

stingeragent

New Member

Oct 16, 2004

33

0

0

Lubbock, Tx

Sep 26, 2005

#9

• Sep 26, 2005

• #9

legalize, could you tell me where on the driveshaft it is? Like front, back middle? Also, how do I tell if its bad or not? And how much will a replacement cost

 

legalize420

Active Member

May 21, 2005

1,541

1

37

South Florida

Sep 26, 2005

#10

• Sep 26, 2005

• #10

stingeragent said:

legalize, could you tell me where on the driveshaft it is? Like front, back middle? Also, how do I tell if its bad or not? And how much will a replacement cost

Click to expand...

i guess i meant to say u joints. there is one on each side of the driveshaft. as far as replacement cost i brought my car to my mechanic and they replaced the driveshaft with one from a junkyard. i dont remember the exact total but i think it was around 200 installed.

 

94 Cobra 5.0

Member

Sep 18, 2004

114

1

16

Ft. Riley, KS

Sep 26, 2005

#11

• Sep 26, 2005

• #11

if you did the u-joints yourself they would be about 15.00 with tax ea from advance. they arent hard to do just the time to do it. if you need a step by step just ask and im sure we all can help you out on that one.

 

G

greenstang1313

New Member

Jun 15, 2005

158

0

0

Chelmsford, MA

Sep 28, 2005

#12

• Sep 28, 2005

• #12

I had the same problem. Start the car up and look underneath. It's probably the heat shields on the cats. You can easily rip them off.

 

Engel

Member

Apr 2, 2005

219

0

16

Currently Fort Walton Beach

Sep 28, 2005

#13

• Sep 28, 2005

• #13

I had the same problem and it was the heat shields on the cats

 

BlackVert

15 Year Member

Oct 3, 2003

5,589

9

98

Bethesda, MD

Sep 28, 2005

#14

• Sep 28, 2005

• #14

mine was a loose exhaust pipe, but that didn't make the whole car shake.

 

donjohn

New Member

Feb 7, 2004

1,757

0

0

Irvine - Southern California

Sep 28, 2005

#15

• Sep 28, 2005

• #15

just wondering if you have aftermarket struts? i have the problem now, and it started when i installed rack and pinion, tie rods, shocks, struts, springs, a arms

i like the idea of the cats, b/c new d/s are a lot more money than ripping off a heat sheild

 

legalize420

Active Member

May 21, 2005

1,541

1

37

South Florida

Sep 28, 2005

#16

• Sep 28, 2005

• #16

can we can rule out the heat shields? that wouldnt make the whole car vibrate, right?