• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

REAL cold air intake. Call me crazy

  • Thread starter Thread starter jas142
  • Start date Start date Apr 24, 2004
Prev
  • 1
  • 2
First Prev 2 of 2
J

jas142

Founding Member
Feb 11, 2002
1,358
0
0
Apr 25, 2004
#21
  • Apr 25, 2004
  • #21
Ok, lots of mixed opinions. Glad to see its been tried before, so I'm not just crazy. The only real problem I'm scared of is sucking in bugs, road debris, or water. Any idea how to prevent bugs and road debris? I know the filter is still in place, but I don't want all that crap in there anyway. I would use a mesh screen but that would probably impede airflow.
 
M

mstngdave

New Member
Apr 25, 2004
1
0
0
Apr 25, 2004
#22
  • Apr 25, 2004
  • #22
Jas 142, There is a plastic flap between the radiator and the fender, this piece is behind the lower left grill opening. I bent this over towards the rad. to allow more air to enter the inner fender . I thought about putting a dryer hose or something at that opening to run up to the air box.
 
0

03gtmustang

New Member
May 26, 2003
923
0
0
Northern Va
Apr 25, 2004
#23
  • Apr 25, 2004
  • #23
Ive been thinking about doing something like this , scroll down about a quarter of the way.
 
G

GinoGT

Founding Member
Aug 11, 2002
1,862
0
36
Apr 25, 2004
#24
  • Apr 25, 2004
  • #24
Cobra and SVT badges on his Fobra R, plus the "ram-air" =
 

tait_gt2002

New Member
Jan 24, 2002
2,171
0
0
Apr 25, 2004
#25
  • Apr 25, 2004
  • #25
I made a really sweet setup by myself, and it cost me around $10. I used some shelving brackets, bolts, washers, and some e-z nuts to create the bracketry. Surprisingly enough there are very easy mounting points already pre-existing to carry this out.

I then took the bottom piece of a plastic jug (rectangular, has to be the right size) and cut a hole in the center, to which I simply inserted flex tubing. I painted the 'scoop' flat black, and you LITERALLY could not see the thing, it was located adjacent to the foglight behind the front bumper. It was a pretty sweet little setup.

With anything like that you are gonna get bugs and water, even if it's an above-the-hood scoop. With the setup I created, you don't have to worry about standing water, unless you are trying to ford rivers. You can go through water-filled dips and it sits high enough to stay out. Road crap wasn't really a problem.

The important part- did it work? I'm sure it didn't hurt. Any time you can get fresh air to the filter it helps. Because it's not as direct, it's likely not going to help as much as pulling your headlight, which actually does help a fair amount. Of course there was no SOTP gain, the gains were only theoretical but they *should* be there, no matter how small.

I can give some further info on exactly how to construct your own, if there is any interest. Just thought I'd chime in.
 

GoBabyVroommm

Active Member
Mar 22, 2003
1,156
0
36
Chicago, For Realss???!!!
Apr 25, 2004
#26
  • Apr 25, 2004
  • #26
I did that rim air on my car and honestly it was a waste of time. Plus you don't want water in your engine.
 

Islander03GT

New Member
Jan 19, 2004
470
0
0
Simi Valley, Ca
Apr 25, 2004
#27
  • Apr 25, 2004
  • #27
meh, all the ricers do it
 
H

Hoppy

Founding Member
Jun 24, 2002
329
0
0
L.A. CA
Apr 25, 2004
#28
  • Apr 25, 2004
  • #28
GinoGT said:
Cobra and SVT badges on his Fobra R, plus the "ram-air" =
Click to expand...


Gino...by far the funniest emoticon I've seen........
I'm gonna hafta' borrow it!

Hop
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

M
2001 v6 heater hose quick connect question
  • mnky99
  • Sep 24, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
586
SN95 V6 Mustang Tech Sep 26, 2025
mnky99
M
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
509
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
681
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
Keeps dying with new cold air intake
  • Creomod
  • Oct 27, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 30, 2024
Jarhead67
J
G
2016 GT, Cold Air/Tune Trouble (overheating) . Advice/Help Please!
  • GLStang
  • Sep 6, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
1
Views
335
2015 - 2023 (S550) Mustang -General/Talk Sep 6, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?