Rear 1/4 window help

Mike in Texas

New Member
Nov 7, 2005
121
1
0
The driver's rear 1/4 window on my 90 conv has quit working. I've removed the window motor and the bushings inside are in a much of very small pieces. Here's my problem, the window itself seems real loose and can be moved back and forth at least 1/2" either way. Is this normal? Is there some part of the window linkage that needs to be fixed? anyone with a diagram of the window linkage or a good description of how it operates?
 
Well no responses, but here's what I've found.
I bought a repair kit for the power motor from AutoZone and replaced the bushings in the motor (just buy the bushings on ebay, the kit from Auto Zone is $10 more and nothing but the bushings fit anyway), installed the motor and everything seems to work fine. Did have to spend some time adjusting the window guides. The interesting part of this is that the car only has 13,000 miles so the bushings must just give out from age, so now I'm replacing them in the passenger side motor as well.