Rear Sway Bar Hardware

[95strokerPSU]

I’m gonna get the Steeda HD rear swaybar but I don’t feel like spending an extra $40 for their hardware kit. What hardware do I need? Just nuts and bolts? The Steeda website says something about “Swaybar Bolt U-Clip”.

Thanks
Dave

 

[95strokerPSU]

ttt

 

[fiveomar]

Digging up an old thread...bought my 94 without a rear sway bar...I have the bolts already, I assume I also need nuts and locking nuts to install? Two ford dealerships I tried didn't have the nuts, so I'll probably try a hardware store to find something that fits and won't rust.

Does the brake/parking brake line also attach to the same area as the rear sway bar? Currently it is detached from something and rubbing against my driver's side rear tire.

Advice is appreciated.

Thanks.

 

[urban96]

yea the rear sway bar bolts up to the lower controll arms. The ebrake lines to attach to the sway bar bolts. Off the top of my head i cannot recall if the bolts are threaded into the LCA or if it goes through them and into a nut. I would crall under the car and look before you go to the hardware store and pickup some bolts. and use some grade8 stuff so it shouldnt break