• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

rebuilt motor problems

  • Thread starter Thread starter mustangsquared
  • Start date Start date Mar 13, 2006

mustangsquared

Founding Member
Jun 8, 2002
828
1
16
new bern nc
Mar 13, 2006
#1
  • Mar 13, 2006
  • #1
just had motor rebuilt (all mods listed in sig)...well now it wont idle....and the coolant tenp gauge wont move. I have adjusted the idle a few times...set it at 850 with normal op temp. Runs fine then ata light will want to stall...but only some of the times. My AFPR went bad so I have a stock one on it so I cant play with the FP.

On a side note...what does the ground wire that goes from the intake to fire wall do (or what is it for)...I noticed it is slightly messed up.

Thanks
 

302RollinHard

New Member
Sep 26, 2005
0
0
0
Columbus, OH
Mar 13, 2006
#2
  • Mar 13, 2006
  • #2
I would look for a vacuum leak. Check hoses/intake seal. By the way, where did you get the kit to swap the Stereo/AC controls in your avatar??? Also do a search for idling problems. lots of stuff on here as you probably know.
 
J

jared_blown5.0

New Member
Dec 27, 2005
73
0
0
Mar 13, 2006
#3
  • Mar 13, 2006
  • #3
check your tps sensor on your throttle body!!!!
 

mustangsquared

Founding Member
Jun 8, 2002
828
1
16
new bern nc
Mar 13, 2006
#4
  • Mar 13, 2006
  • #4
I used the Idle screw to set the idle to 850 rpm (with the IAC unplugged)....then reset the TPS to .98v and then reattached the IAC plug. Timing is at 10* BTDC.

I will look for a vacuum leak....I know I need to fix that ground wire (the braided one on the lower intake to fire wall) as it is very loose.

As fot the switch around of radio and AC I did it myself. It is easy if you have a dremel and a few hours of time on your hands. I really need to post a "How to" with some picts since everyone always asks about it. I can give you a step by step if you want it.
 

91lxttrim

New Member
Mar 7, 2006
194
0
0
AZ
Mar 13, 2006
#5
  • Mar 13, 2006
  • #5
That ground wire from the intake to firewall is very important. Have you had hard starting problems?

I would definately be interested in your 'How to' for that radio location!
BTW is that a Pioneer 8800? Nice.
 

mustangsquared

Founding Member
Jun 8, 2002
828
1
16
new bern nc
Mar 15, 2006
#6
  • Mar 15, 2006
  • #6
I had the ground wire fixed. The car now idles without stalling...at 1200 rpm. Need to work on that some more.

I will try and get a "how to" together this weekend. The stereo is a clarion.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 15, 2006
#7
  • Mar 15, 2006
  • #7
The ground wire was the power ground for the O2 sensor heaters. It is very important to consistant smooth operation.
 

mustangsquared

Founding Member
Jun 8, 2002
828
1
16
new bern nc
Mar 15, 2006
#8
  • Mar 15, 2006
  • #8
I also did the IAC dremel mod and set the idle w/o IAC connected to 1000 RPM.... Nice mod as I no longer stall but I still have a slight cam lop at idle.
 
You must log in or register to reply here.

Similar threads

S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
914
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
Engine 87 NA - Tune or no Tune needed?
  • R82148V
  • Sep 17, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
511
Fox 5.0 Mustang Tech Sep 17, 2025
R82148V
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
3K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
SURGING IDLE / NO IDLE CHECKLIST FOR 1999–2004 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?