replacing cobra ignition module

H

hiimt0ny

New Member

Dec 29, 2005

13

0

1

Oct 17, 2007

#1

• Oct 17, 2007

• #1

Okay so i got the 95 cobra and i pull code 212. so im going to go ahead and change the ignition control module because im guessing it went out.

the one i have is dyna mod. i dont know if this comes with the car or not but i would like to get it again to replace this one instead of stock. unless the car already comes with this one stock. does the 5.0 dyna module work on cobras the same as on the regular 5.0's. and wehre can i get this module?

 

F

fordtech28

Member

May 12, 2006

312

0

17

Riverside Cali.

Oct 17, 2007

#2

• Oct 17, 2007

• #2

You can buy the stock one from the autoparts store and it will run without a problem

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Oct 17, 2007

#3

• Oct 17, 2007

• #3

Dyna isnt stock. You can get them in the aftermarket however. Be sure to use heat sink grease upon installation. Be careful with it - too much inhibits the electrical connection and too little allows the module to run hot.

Good luck.

 

go-stang5.0

New Member

Jan 27, 2003

2,244

0

0

Glenview,Il

Oct 17, 2007

#4

• Oct 17, 2007

• #4

Doesn't performance distributers sell Dyna Mod parts?

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Oct 17, 2007

#5

• Oct 17, 2007

• #5

go-stang5.0 said:

Doesn't performance distributers sell Dyna Mod parts?

Click to expand...

 

hollywoodstang

Active Member

May 23, 2006

1,095

2

36

Oct 18, 2007

#6

• Oct 18, 2007

• #6

Try Accel module. works great and it's about $100.