• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

replacing lifters a must??

  • Thread starter Thread starter stykthyn
  • Start date Start date Nov 18, 2007

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Nov 18, 2007
#1
  • Nov 18, 2007
  • #1
while my block was out getting refreshed the lifters got mixed up, so now I dont know what bore they came from. on top of that I heard that even changing cams requires new lifters. Is this true? Can I re-use the lifters I have now or do I just need to get new ones?
 
F

Fox8950

Member
Jun 29, 2007
247
2
18
Nov 18, 2007
#2
  • Nov 18, 2007
  • #2
with non roller lifters yes because the flat tappets and the cam wear into each other but with rollers don't sweat it, is cheap insurance of course to swap em out but if they arn't ticking and you don't want to spend the cash I wouldn't worry about it.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Nov 18, 2007
#3
  • Nov 18, 2007
  • #3
Fox8950 said:
with non roller lifters yes because the flat tappets and the cam wear into each other but with rollers don't sweat it, is cheap insurance of course to swap em out but if they arn't ticking and you don't want to spend the cash I wouldn't worry about it.
Click to expand...

Agreed
 

black87ttop

Member
Oct 29, 2007
43
2
8
burlington,new jersey
Nov 18, 2007
#4
  • Nov 18, 2007
  • #4
x3 true that
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Nov 19, 2007
#5
  • Nov 19, 2007
  • #5
thanks guys! I was sweating that one. Someone told me they all had to be replaced and I hadn't planned for that one in the budget.
 

ShortThrow50

Member
Oct 22, 2006
923
2
16
Pa
Nov 19, 2007
#6
  • Nov 19, 2007
  • #6
I reused my lifters
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Nov 19, 2007
#7
  • Nov 19, 2007
  • #7
roller or flat tappet? if flat tappet get new, if roller it does not matter a single bit
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Nov 19, 2007
#8
  • Nov 19, 2007
  • #8
rollers for teh win, just out of curiosity, is there a lifter that would provide an upgrade over stock. this isnt going to be a race car, so I doubt this is an area that will see much of a gain in an aftermarket piece
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Nov 19, 2007
#9
  • Nov 19, 2007
  • #9
No...the only time you would need to upgrade your stock roller lifters would be if they were going to see a lot of high RPM duty at the top of the tach. For normal driving between idle and the 6,250 stock rev limiter, a standard set of OEM lifters will work just fine.
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Nov 19, 2007
#10
  • Nov 19, 2007
  • #10
thats what I thought, thanks
 
You must log in or register to reply here.

Similar threads

H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
616
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
G
Engine Pushrod Length Question
  • germain101
  • Sep 22, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
750
Fox 5.0 Mustang Tech Sep 25, 2025
Noobz347
C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
246
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
T
408w pushrods
  • Towegage
  • Sep 19, 2025
  • Fox Engine Swaparoo
Replies
5
Views
493
Fox Engine Swaparoo Sep 19, 2025
Noobz347
D
Rockers, lash adjusters and timing: help with parts (4.6 2v)
  • dvigAtel
  • Nov 1, 2025
  • Other Auto Tech
Replies
0
Views
388
Other Auto Tech Nov 1, 2025
dvigAtel
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?