Great Job !!!
I think you could hit 12's the way you are too...
You see the air at 100mph is coming thru the hood gap and hitting the top radiator support. Here is what I would do:
1) So, take some card board (paint it black or neon orange) and run it across the radiator support and over the motor and then take some dryer hose and bend the cardboard so that it runs into the dryer hose.
2) Then you can staple them together.
3) Run the dryer hose down the back of the motor and out to the back bumper.
4) Cut a hole in your bumper and mount the dryer hose and tell people you have "Hood Gap Induction"
5) Make all necessary "Hood Gap Induction" stickers and place them on your hood.
I think you could hit 12's the way you are too...
You see the air at 100mph is coming thru the hood gap and hitting the top radiator support. Here is what I would do:
1) So, take some card board (paint it black or neon orange) and run it across the radiator support and over the motor and then take some dryer hose and bend the cardboard so that it runs into the dryer hose.
2) Then you can staple them together.
3) Run the dryer hose down the back of the motor and out to the back bumper.
4) Cut a hole in your bumper and mount the dryer hose and tell people you have "Hood Gap Induction"
5) Make all necessary "Hood Gap Induction" stickers and place them on your hood.