• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

rocker arm question... help please...

  • Thread starter Thread starter Vapors
  • Start date Start date Sep 18, 2005

Vapors

New Member
Aug 26, 2005
39
0
0
Bakersfield
Sep 18, 2005
#1
  • Sep 18, 2005
  • #1
I have scorpion rockers with 1.7 ratio on gt 40 heads and they fell apart so i am replacing them with fms 1.7 rockers and i have never installed rockers and i was wondering how hard it is or if i need any special tools or what to torque the bolts to??? Any information will help... thanks...
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Sep 18, 2005
#2
  • Sep 18, 2005
  • #2
assuming they are probably pedestal mount rockers, you just unbolt it, lift it up and place the FMS rockers and pedestals in.

Not sure on the torque spec though....
 

Vapors

New Member
Aug 26, 2005
39
0
0
Bakersfield
Sep 18, 2005
#3
  • Sep 18, 2005
  • #3
yes they are pedestal mount
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Sep 18, 2005
#4
  • Sep 18, 2005
  • #4
I use a ton of Scorpions and have never had any issues at all, what fell apart? You need to figure out why? They will also stand behind there products.

When you swap to a different brand rocker you need to set them up all over again. Check preload, pushrod length, geometry, shims etc... All rockers pivot points are not the same just because they are the same ratio means nothing.
 

Vapors

New Member
Aug 26, 2005
39
0
0
Bakersfield
Sep 18, 2005
#5
  • Sep 18, 2005
  • #5
it was some needle bearings... dont know what cause it to fall apart but if you have any ideas i am open for them.. thanks
 
You must log in or register to reply here.

Similar threads

4
Drivetrain Wilwood Clutch and Brake Pedal Combo Installation - Help
  • 427stang
  • Jul 8, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
124
Fox 5.0 Mustang Tech Jul 8, 2026
427stang
4
D
Rockers, lash adjusters and timing: help with parts (4.6 2v)
  • dvigAtel
  • Nov 1, 2025
  • Other Auto Tech
Replies
0
Views
381
Other Auto Tech Nov 1, 2025
dvigAtel
D
A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
318
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?