Rotor ?

my powerslot rotors said to face the top of the slot towards to front of the car...my brembo's(same as the one's you have pictured) were labeled L and R with the Top of the slot facing the rear so that how i installed them....no problems and been a few months.
 
What do the directions say? Seriously, did the box have any instructions or were they not included? :shrug:


I have always been under the impression that if you are looking at the above picture, and had a car's nose facing left, the rotor would then be properly oriented.
 
It all depends on the slots INSIDE the rotor.

WHich way do they face? You want the inside slots to TRAIL with the direction of travel of the rotor.

If the slots inside the rotor are straight, the rotor can be mounted either way.

I think Brembo orients their rotors opposite of most onther companies. In the above pic, the front of the car would be on the left side.

I think the front of the car on the right side looks better.

Either way shouldn't affect the rotor in terms of a vibration and such. The crossdrilled hole and slots don't do anything anyway so it doesn't matter what direction they face, just make sure the internal fins trail with the direction the rotor spins.
 
No directions. They are not marked . The brembo oem repacement rotors and the sloted ones are the same except for the slots. I bought this off a company that drills and slots the oem brembos themselves ence the reason for no right or left makings. The air veins in the middle do not angle they are straight. Unlike stock cobra brake which I have. Thanks for the help.
 
Suit yourself. The slots and drilled holes do really do much anyway. Doesn't make a difference which way they face really. It's the vanes in the middle that matter more.