• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

Roush Rear Lowering Springs

  • Thread starter Thread starter walter
  • Start date Start date Jan 15, 2008

walter

Founding Member
Aug 13, 1998
1,054
0
46
Houston TX
Jan 15, 2008
#1
  • Jan 15, 2008
  • #1
I just ordered a set since A: I didn't want to go through the trouble to change the whole suspension B: wanted to retain a decent ride height for these lousy Houston streets I travel.

Who has this setup? How do you guys/ladies like it? I e-mailed Roush and they told me this drop won't bring the pinion angle out of spec. Is this right or have you experienced otherwise?

Thanks! :SNSign:
 

anthony05gt

Active Member
Mar 18, 2006
1,262
1
37
Maryland
Jan 15, 2008
#2
  • Jan 15, 2008
  • #2
You'll be fine. I have all 4 Steeda springs (1'' drop) but my son has just the rears and it looks great....level. I'll be reinstalling my stock front springs soon because the Whipple weighs the front end down a bit.
 

walter

Founding Member
Aug 13, 1998
1,054
0
46
Houston TX
Jan 15, 2008
#3
  • Jan 15, 2008
  • #3
So both your cars didn't need to tweak the pinion angle?
 
M

mrbizkitt

Member
Mar 24, 2002
34
0
7
New Jersey
Jan 15, 2008
#4
  • Jan 15, 2008
  • #4
Just put the rears on this last week and all is good. Sits level and ride feels pretty much like stock.
 

walter

Founding Member
Aug 13, 1998
1,054
0
46
Houston TX
Jan 15, 2008
#5
  • Jan 15, 2008
  • #5
awesome, awesome AWESOME!!!

Can't wait! as cool as the car's styling is I'm not a fan of the retro 70's jacked up suspension look.
 
R

racerraj

Founding Member
Dec 17, 2001
493
32
39
Dickson, TN
Jan 16, 2008
#6
  • Jan 16, 2008
  • #6
I'm curious if anyone with only Rear Springs installed have driven the car HARD thru some turns. Does it help or hurt the push? I can't stand the way they push going into a curve.

Thanks,
Roger
 

RBonite

New Member
Jun 8, 2006
9
0
2
Vallejo, CA
Jan 16, 2008
#7
  • Jan 16, 2008
  • #7
I put them on towards the end of the summer and was completely satisfied. Leveled the car perfectly....if that's all you're looking for right now. I have a steep driveway which is why I didn't go with the fronts. But that jacked up rear had to go. Below is the after install shot. I'll look for a before pic.

After
View attachment 336550

Before
View attachment 336552
 
You must log in or register to reply here.

Similar threads

Suspension A not-so-low lowering spring
  • Justin87
  • Mar 7, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
32
Views
4K
Fox 5.0 Mustang Tech Mar 12, 2024
Justin87
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
Rear springs?
  • DemonGT
  • May 20, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
860
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 20, 2020
Mustang5L5
Car put me down......again. What now?
  • Wayne Waldrep
  • Sep 10, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
7K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 18, 2023
Mindseye007
Suspension Quad Shocks: Don't Be So Quick To Remove Them
  • Mustang5L5
  • Sep 14, 2017
  • Fox 5.0 Mustang Tech
Replies
15
Views
31K
Fox 5.0 Mustang Tech Sep 21, 2017
RangerJoe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?