Anyone ever install one in their car I am thinking about one and am wondering if you have room to work with under where they should be going it seems like your not going to have any room becasue of the heater vents pics of the install would be great thanks for the help guys:SNSign:
I'd be weary of having to drill 3 holes into my dash. But heres some info on the install from a Saleen blower install manual:
Have to make a template for the pod, so that it is centered just right for the 3 holes you have to drill out:
.
.
.
.
.
.
A template someone made when doing the install:
.
.
.
.
.
.
Pic from that guys install:
.
.
.
.
.
.
Some of the directions that guy posted:
- (Gauge Pod) Remove the dash bezel and instrument cluster. GLUE the #10 nuts to the washers. Drill (3) holes in your dash centered above your A/C outlets.
- Make sure and check your directions for the TEMPLATE and wiring diagram. It helps if you have a son with long arms and patience.
- Drill a hole in the firewall for the wires to pass through. Splice your wires with the connectors provided.
.
.
.
These are not my instructions, like I said this is not something I would do. But I remember seeing these directions when installing my Saleen blower - in the online manual I found that someone posted up.