Secret to moving A/C Condensor?

[Xticee]

Before I break something, what's the secret to moving the A/C condensor out of the way for a cam swap? I've got everything stripped down and that last thing to do before pulling cam is to get that dang thing out of the way. I've got the hold downd backets off and it's free from the frame but all lines are still connected. I didn't think I had to disconnect the A/C lines to move it, but do I? Those lines are pretty stiff.

Thanks!
Jay

 

[legalize420]

it can be done without removing the lines. you have to kinda pull it out towards the engine then rotate 90* up and to the left.

 

[Xticee]

Yeah, that's kinda how I was trying to move it, but it must take a lot more effort than I was putting on it. I didn't want to break anything. Besides the 2 bolts/brakets on top, there isn't anything else that needs to be removed is there? I was lifting it ot of the holes on the bottom.