Shifter question for Tremec 500 / 600 people

M

Mike92GT

Founding Member

Jan 23, 2002

583

0

0

Florida

Nov 2, 2005

#1

• Nov 2, 2005

• #1

I'm going to be buying a Tremec 600 trans sometime in the near future. It looks like they come with a fairly decent billet Hurst shifter, but no handle. What handle are you guys using on yours, or did you upgrade the entire shifter? Will any handle fit the Hurst base? I heard they have a different thread...

 

M

MatthewP

Founding Member

Dec 7, 2001

355

0

0

Calgary, Alberta

members.shaw.ca

Nov 3, 2005

#2

• Nov 3, 2005

• #2

I used a handle off a Hurst 5.0 shifter I had lying around. It works great. The shifter that comes with the transmission is fine too. Good luck.

-Matthew

 

1

1990LXDropTop

New Member

Dec 4, 2003

430

0

0

42

Western Massachusetts

Nov 3, 2005

#3

• Nov 3, 2005

• #3

I didn't like the shifter that came with my TKO-500. It just didn't feel right to me. I bought a pro50 shifter and I like it much better.

 

S

Starman

New Member

May 27, 2005

78

0

0

Nov 3, 2005

#4

• Nov 3, 2005

• #4

you can pretty much use any handle. The stock one will fit. I use an adjustable MGW one (kinda like the new adjustable UPR one) to set the handle back and towards the center a bit so I don't come so close to hitting the drivers side edge of the center console ('95 GT)

 

M

Mike92GT

Founding Member

Jan 23, 2002

583

0

0

Florida

Nov 3, 2005

#5

• Nov 3, 2005

• #5

Thanks for the replies. Can I use a Pro 5.0 or Steeda handle on the Hurst base possibly? I thought I read somewhere that the Hurst mounting holes were smaller or that something had to be modified. I'm leaning towards just buying a entire Pro5.0 shifter, but I'm trying to save a few bucks

 

S

strokedandblown

Banned

May 3, 2005

555

0

0

USA

Nov 3, 2005

#6

• Nov 3, 2005

• #6

Yeah i have the Steeda Tri ax handle on mine it works great and i like the feel of my hurst shifter way better than the Pro-50 i had on my t-3550,

shifters are like women everyone has thier own prefrance, thats why there are so many diff kinds out there.

 

M

Mike92GT

Founding Member

Jan 23, 2002

583

0

0

Florida

Nov 3, 2005

#7

• Nov 3, 2005

• #7

I'll probably just use a Tri-ax handle on the stock shifter for now, and eventually upgrade to a new shifter. Can the Tremec shifter still be easily replaced with trans in the car like a T5? Also I found out that Summit sells the factory Hurst shift handle that should work with the stock shifter. I have the part number if anyone is interested

 

S

Sicarius428

Active Member

Jan 6, 2004

2,085

5

49

Nov 3, 2005

#8

• Nov 3, 2005

• #8

Does MGW make a whole shifter for the TKO's? I am really pleased with mine(T5 model) and was wondering if anybody has any input on a MGW one for the TKO's.
Kevin

 

M

Mike92GT

Founding Member

Jan 23, 2002

583

0

0

Florida

Nov 3, 2005

#9

• Nov 3, 2005

• #9

They do make one for the Tremec 500 / 600. I don't think they make one for the older Tremec TKO / 3550

 

S

Sicarius428

Active Member

Jan 6, 2004

2,085

5

49

Nov 3, 2005

#10

• Nov 3, 2005

• #10

Sweet. Thanks for the info.
Kevin