Shop in Vancouver

boomr · May 5, 2006

Is anyone familiar with "Fast Specialties" in Vancouver? I'll be looking to get a lightning tuned, and was wanting to go with SCT stuff (they're the only local SCT dealer with a dyno that is listed). I've tried e-mailing them, but get nothing in return. Just looking for somebody that knows of them or experience with them. Thanks

In "Fast Specialties" defense, they have e-mailed me back. Sounds good so far. Thanks everyone for all the responses.

Mike

SMOKEDYA · May 5, 2006

Grab a match and a bucket of gas! No seriously tho i cant say so for myself, but the majority of the people on here deal with krazy koncepts with the lightnings, and i beleive blue oval might know how to tune them as well? I have seen on the fast spec. site that they are the only ones certified by SCT and that there dyno (mustang) is the best to use for the tune. This is comming from SCT themselfs! Krazy Koncepts site does have some kick ass lightnings that they have done. I havent delt or bought from fast but from what little iv'd talked with them there not pushy or telling me what i need witch is great! Myself i go threw summit or jegs no one local shops can beat them! And do all my work myself. peace

john

boomr · May 5, 2006

SMOKEDYA said:
And do all my work myself. peace

john

I don't mind working on the truck, I've done everything so far, just need a dyno to get a decent tune once I throw the pulley on it. Thanks.

Mike

98Snakebite · May 5, 2006

go thru krazy koncepts. Good guys

click here for their site.

duner · May 5, 2006

boomr said:
Is anyone familiar with "Fast Specialties" in Vancouver? I'll be looking to get a lightning tuned, and was wanting to go with SCT stuff (they're the only local SCT dealer with a dyno that is listed). I've tried e-mailing them, but get nothing in return. Just looking for somebody that knows of them or experience with them. Thanks

Long ass drive down the ALCAN for a dyno tune.

Quickshift_02GT · May 5, 2006

I've dealt with Fast Specialties a couple times now and the've been extremely helpful and great service.

Any reason you guys don't favor them as strongly as the other shops?

SMOKEDYA · May 5, 2006

Quickshift_02GT said:
I've dealt with Fast Specialties a couple times now and the've been extremely helpful and great service.

Any reason you guys don't favor them as strongly as the other shops?

Well like i said i havent delt with them hardly at all! But from what i've HEARD! BUT if it were me then i'd hit them up for a tune do to the fact of the responce from SCT. It sure does make it nice now that there are more stang/speed shops out here in the area to choose from other then just 1! And there is RRev motorsports (i think) over at jatzen beach but i'm not to sure how tim is with the stangs ? But he does have a dyno and a bad a$$ 9.8 supra peace

john

boomr · May 5, 2006

duner said:
Long ass drive down the ALCAN for a dyno tune.

Have to get the truck tuned, don't want to waste the motor, no dyno's here to run it on.
I'll be moving down to WA in about two weeks. After I get down there, I'll either put the 4lb pulley on or the 6lb pulley, haven't decided on that one yet, and I still need to finish my mustang project, should have that one done this summer, if all goes as planned.

agirlbeatyou · May 6, 2006

www.blueovalperformance.net 360-993-1745

If you are looking to meet a great bunch of people call Blue Oval Performance, HE tunes SCT and is an authorized dealer. Call both shops and get quotes and go from there. Make sure when you call that you are comparing apples to apples, if I were you... find out from each shop whats included in the price from begining to end....

agirlbeatyou · May 6, 2006

SMOKEDYA said:
I havent delt or bought from fast but from what little iv'd talked with them there not pushy or telling me what i need witch is great!

TRADER!!! AND I thought you were my friend....guess not anymore. ( j.k... alittle)

SMOKEDYA said:
And do all my work myself.

YOU DONT SAY......

SMOKEDYA · May 6, 2006

wifesweetstang said:
TRADER!!! AND I thought you were my friend....guess not anymore. ( j.k... alittle)

YOU DONT SAY......

Its like that huh just because i dont buy from the shop/shops you do?

I'm not refering him to any certian shop or giving anyone a bad name, BUT if you like then i can give him some not so kind hearsay from some people that have delt with some of the local shops, I think you have taken it wrong but so it be! I contacted SCT and fast in the past and they both claim to dyno the SCT's on a stang dyno for best results? And thats why i buy from summit and jegs cause no one local can match them!

john

SMOKEDYA · May 6, 2006

Originally Posted by SMOKEDYA
And do all my work myself.

YOU DONT SAY......

Dont know what thats suppose to mean????? Or what car your referring to? Butif i needed gears done or something i could'nt or didnt feel comfortable doing then i would take it to a shop it's just hard to trust anymore after finding out that when the new owner of the 95 took it to a shop they said the clutch was installed backwards! And this was by a "CERTIFIED FORD DEALER!" the even worst part is the disc was labeled on what side to put the disc IE:this side to flywheel. Thats the fun to me of moding is doing your own work. Ya gotta learn some way or another! peace

john

duner · May 6, 2006

boomr said:
Have to get the truck tuned, don't want to waste the motor, no dyno's here to run it on.
I'll be moving down to WA in about two weeks. After I get down there, I'll either put the 4lb pulley on or the 6lb pulley, haven't decided on that one yet, and I still need to finish my mustang project, should have that one done this summer, if all goes as planned.

I lived in Anchorage for a long, long time. I moved down here just over six years ago. It's nice not to freeze my nuts off for months at a time. We have a very good selection of performance shops around this area.

Keith

agirlbeatyou · May 6, 2006

SMOKEDYA said:
Originally Posted by SMOKEDYA
And do all my work myself.

YOU DONT SAY......

Dont know what thats suppose to mean????? Or what car your referring to? Butif i needed gears done or something i could'nt or didnt feel comfortable doing then i would take it to a shop it's just hard to trust anymore after finding out that when the new owner of the 95 took it to a shop they said the clutch was installed backwards! And this was by a "CERTIFIED FORD DEALER!" the even worst part is the disc was labeled on what side to put the disc IE:this side to flywheel. Thats the fun to me of moding is doing your own work. Ya gotta learn some way or another! peace

john

Dude Im just playing with you....

SMOKEDYA · May 6, 2006

wifesweetstang said:
Dude Im just playing with you....

I know!!!! (well i think ) So anyways you seen me lastnight and could'nt say HI!!!!! So was that your expi? peace

john

BadTony · May 6, 2006

misha - I like both Blue Oval and Fast Specialties - poke

boomr · May 6, 2006

Thanks for all the response's, this is helping.

Shop in Vancouver

boomr

Member

SMOKEDYA

boomr

Member

98Snakebite

New Member

duner

Mr. Warmth

Quickshift_02GT

New Member

SMOKEDYA

boomr

Member

agirlbeatyou

Burnout Queen

agirlbeatyou

Burnout Queen

SMOKEDYA

SMOKEDYA

duner

Mr. Warmth

agirlbeatyou

Burnout Queen

SMOKEDYA

BadTony

New Member

boomr

Member

Similar threads

Shop in Vancouver

Member

Member

New Member

Mr. Warmth

New Member

Member

Burnout Queen

Burnout Queen

Mr. Warmth

Burnout Queen

New Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency