• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Shudder / Vibration at low rpm

  • Thread starter Thread starter 87lc2
  • Start date Start date Oct 1, 2009
8

87lc2

Member
Oct 16, 2005
214
0
17
Oct 1, 2009
#1
  • Oct 1, 2009
  • #1
Recently got this car and have noticed that there is a shudder or vibration when accelerating in 1st and 2nd gear, but only until ~ 2000 rpm, then its smooth as day. It does this around turns or going straight, and there is no noise or chatter when it happens. Also, it does not vibrate at all on the highway at any speed, its very smooth on the highway. Really only when letting out the clutch and accelerating until 2k. Anyway, does anyone have an idea of what this might be? The car does have gears in it (previous owner), and the shifter it not vibrating or anything.
 

Dave0803

Member
Mar 3, 2003
236
0
17
Leonardtown, MD
Dec 8, 2011
#2
  • Dec 8, 2011
  • #2
I have the problem with my 00 GT. It seems to be its worst from 1000 RPM to 1500 RPM. Have you found a fix for it yet? I replaced my motor mounts although my shifter never did shack either. My next guess is the clutch.
 

squeak93

15 Year Member
Jun 2, 2005
2,277
368
164
Joplin, Missouri
Dec 11, 2011
#3
  • Dec 11, 2011
  • #3
Do you feel the vibration in the steering wheel or the rest of the car (as in the seat of ur pants?)
 

Dave0803

Member
Mar 3, 2003
236
0
17
Leonardtown, MD
Dec 12, 2011
#4
  • Dec 12, 2011
  • #4
I feel it in the whole car. I feel it more when reving between 1000 and 1500 RPM's in Neutral. I don't really feel it much when driving down the road unless I am moving slow around that same RPM range.
 

trinity_gt

10 Year Member
Jan 31, 2003
3,125
81
99
Canada
Dec 12, 2011
#5
  • Dec 12, 2011
  • #5
Do you know if the clutch had been replaced before you got it?

That sort of vibration might be caused by a clutch assembly that's out of balance. If the dowels were not installed after the flywheel was resurfaced the clutch may have been installed with excessive runout.
 

Dave0803

Member
Mar 3, 2003
236
0
17
Leonardtown, MD
Dec 12, 2011
#6
  • Dec 12, 2011
  • #6
I know it's not the stock clutch in the car now. As with any used car...I don't know when and how well the clutch was installed. I'm just going to replace the clutch and flywheel as soon as I get the chance.
 
You must log in or register to reply here.

Similar threads

B
Acceleration Vibration
  • Blown02svt
  • Dec 31, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
638
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 5, 2026
General karthief
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
215
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
C
1967 Mustang 5.0 swapped shuddering/sputtering issues
  • Cro67
  • Sep 24, 2025
  • Fox Engine Swaparoo
Replies
3
Views
242
Fox Engine Swaparoo Sep 25, 2025
General karthief
J
Low RPM jerking
  • Justinkins
  • Jul 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
131
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 11, 2026
fasterthangas
F
Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
569
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 5, 2026
Ryu
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?