Slip Yoke Worn Out

D

Dave34

Member

Dec 8, 2014

63

1

18

May 19, 2015

#1

• May 19, 2015

• #1

My slip yoke is worn down in the middle of it someone told me it was a tail shaft bushing but ford doesn't have one and the one I ordered online was wrong and that was the only one I could find I also replaced the rear seal

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,216

17,899

224

Massachusetts

May 19, 2015

#2

• May 19, 2015

• #2

Dave34 said:

My slip yoke is worn down in the middle of it someone told me it was a tail shaft bushing but ford doesn't have one and the one I ordered online was wrong and that was the only one I could find I also replaced the rear seal

Click to expand...

I'd offer you up some choices, but you don't list what year Mustang you have, or what transmission is in it. So I have no idea what to look up.

Also, are you looking up a slip yoke? A tailshaft bushing? or both?

 

D

Dave34

Member

Dec 8, 2014

63

1

18

May 19, 2015

#3

• May 19, 2015

• #3

1991 gt with a t-5 I got the tailshaft bushing and it didn't fit I'm getting a new slip yoke but I don't want to get a new one and the same thing happen

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,216

17,899

224

Massachusetts

May 19, 2015

#4

• May 19, 2015

• #4

What's the brand and p/n of the bushing that you got that didn't fit?

Timkin 5202 is the p/n for the bushing and seal for a T-5

http://www.summitracing.com/parts/tmk-5202

There are cheaper places to get it than summit, but that's the kit. (rockauto.com has it for $9)



If that doesn't fit, then your original T-5 has been replaced with something else (earlier year perhaps)

 

D

Dave34

Member

Dec 8, 2014

63

1

18

May 19, 2015

#5

• May 19, 2015

• #5

here's the link Mustang Tailshaft Bushing (79-95)

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,216

17,899

224

Massachusetts

May 19, 2015

#6

• May 19, 2015

• #6

Well, that's it. However that's VERY overpriced. The timkin one is half that and comes with a seal and you can get it at autozone.

HOWEVER, if that's not the right one, then you might not have a T-5. Any pics of what you are working with under the car.

Are you installing this out of the car, or did you take the trans out? How did you remove the old bushing?

 

Last edited: May 19, 2015

D

Dave34

Member

Dec 8, 2014

63

1

18

May 19, 2015

#7

• May 19, 2015

• #7

i dont have the tranny right now when i get it back ill give pictures