Smog Pump Tude (?) Removal

B

breadfan35

New Member

Jul 28, 2002

45

0

0

Dallas,Tx

Aug 8, 2004

#1

• Aug 8, 2004

• #1

Ok, I removed my smog pump, and now I want to remove this tude that it was attached to. Here are some pics:

What can I plug those (one on each side) wholes on the back of the Heads with? The big one. Is it groved to where I can put a screw in it? What have you guys that have removed it done to plug the wholes? Thanks for the advice.

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Aug 8, 2004

#2

• Aug 8, 2004

• #2

They sell thermactor plugs which "plug" up the hole where the smog equipment goes...you can get them at a Ford Dealership - part # F4ZZ-6E086-A

and you can buy some from Summitracing - part # TFS-51400265

They screw right in...they cost anywhere from $2-$8 bucks depending on where you get them from...

Alls you need is those two and your set

 

B

breadfan35

New Member

Jul 28, 2002

45

0

0

Dallas,Tx

Aug 8, 2004

#3

• Aug 8, 2004

• #3

5spd GT said:

They sell thermactor plugs which "plug" up the hole where the smog equipment goes...you can get them at a Ford Dealership - part # F4ZZ-6E086-A

and you can buy some from Summitracing - part # TFS-51400265

They screw right in...they cost anywhere from $2-$8 bucks depending on where you get them from...

Alls you need is those two and your set

Click to expand...

Sweet! Thanks so much for the info.

 

BlooDReigN

Member

Feb 22, 2004

283

1

16

Calgary, Alberta

Aug 8, 2004

#4

• Aug 8, 2004

• #4

I used a screw + some silicone stuff

 

S

SlowGT

Founding Member

Jun 17, 1999

826

0

0

Columbia Co, PA

Aug 8, 2004

#5

• Aug 8, 2004

• #5

you can also use plugs from your local Ace hardware store

 

Stang8URMPRT

Active Member

Dec 28, 2003

1,100

1

38

Daytona Beach, FL

Aug 8, 2004

#6

• Aug 8, 2004

• #6

I cut the tube from where it bolts to the head, and just welded the parts that attach to the head closed, bolted them back up, and done.

 

5

5.0guy

Member

Apr 17, 2004

320

0

17

MI

Aug 8, 2004

#7

• Aug 8, 2004

• #7

what size bolt holds those on?

 

5

5.0guy

Member

Apr 17, 2004

320

0

17

MI

Aug 9, 2004

#8

• Aug 9, 2004

• #8

1/2" bolts holding the crossover tube on. 5/8" coarse thread set screw is what I used to plug it. the driver's side head was pretty plugged up so I just did the flip method on that one. pretty tight fit with motor in the car, but I got er done!