• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Smoking

  • Thread starter Thread starter Makdaddymac
  • Start date Start date May 3, 2006
M

Makdaddymac

New Member
May 28, 2005
323
1
0
orlando
May 3, 2006
#1
  • May 3, 2006
  • #1
Smoking,MPG HELP

My car smoke from the manifold if i take it upto 4k-4.5k, but if i drive it under3k it doesnt do anything, i can see that there is oil leaking from the lower manifold(im fixing that).
Is the leak my only problem. IM concerned its something else cause(i dont recall if this is new or not) but around the tb and top intake manifld right were the two connect, is discoloration almost completely around the connection as if they were wet,possibly GAS!? Any clues
Also my MPG isnt that great maybe around 12-15 which isnt ****ty but defintely not as good as can can be. Besides the tune up basics would a faulty 02sens send a CODE/CHECK LIGHT on these 5.0's or do they just go bad and you have to replace them..
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
May 3, 2006
#2
  • May 3, 2006
  • #2
There shouldn't be any gas around the throttle body... But if your EGR system is still hooked up, you could be leaking coolant.
 

mattmcdan

Member
Apr 19, 2006
176
0
19
Okeechobee, Florida
May 3, 2006
#3
  • May 3, 2006
  • #3
You most likely need valve cover gaskets too. Its probably seeping some oil on the headers and burning it off.
 
M

Makdaddymac

New Member
May 28, 2005
323
1
0
orlando
May 3, 2006
#4
  • May 3, 2006
  • #4
im sorry its around the egr and the plenum!
intake gasket job and valve gaskets mine as well while its all apart anyways.
 
J

jerry beach

Founding Member
May 20, 2002
2,671
0
46
Ocala,FL
May 3, 2006
#5
  • May 3, 2006
  • #5
If they are the stock valve cover gaskets, dont make the mistake of throwing them away if they are not damaged. Just clean them up and re-use them. They will be metal, covered in rubber if they are stock. Keep them, they are the best.

Install a new PCV valve and a new screen (under it) while you are in there.
 
You must log in or register to reply here.

Similar threads

I
Engine Insane fuel trims +25% LTFT Bank 1, -16% LTFT Bank 2
  • imw_stl
  • Aug 31, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
437
SN95 4.6L Mustang Tech Sep 19, 2025
Mustang5L5
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
751
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
3K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
T
  • Locked
1990 2.3L automatic - real bad engine sputtering
  • the_steve_randolph
  • Jun 13, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 14, 2024
the_steve_randolph
T
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?