SN 95 Rearend conv. ? Wheel Fitment?

stang120gt · Nov 29, 2005

Ok i have a 94 gt rearend that im going to do 5 lug conv on the rear of my 92 vert. My quesiton is since im running the wider rearend. Will i be able to run the 10th anti cobra wheels there 17x9's. I also no that you usally cant run the 9" wide wheels on the rear. But is there anything i can do to get them to fit. Roll the lips, what just tell me please help me.

Thanks guys

Also i have tryed to contact sirsureshot39 several times with no respones because he has those wheels on his car. But he wont help i guess

.

vristang · Nov 29, 2005

stang120gt said:
Ok i have a 94 gt rearend that im going to do 5 lug conv on the rear of my 92 vert. My quesiton is since im running the wider rearend. Will i be able to run the 10th anti cobra wheels there 17x9's. I also no that you usally cant run the 9" wide wheels on the rear. But is there anything i can do to get them to fit. Roll the lips, what just tell me please help me.

Thanks guys

Also i have tryed to contact sirsureshot39 several times with no respones because he has those wheels on his car. But he wont help i guess

.

I used a 95 rear in my 90 GT. I did need to use 17x9" wheels with a 24mm offset. to get them to fit. Still not ideal though as the outer fender lip still rubs some times. Then again maybe that is due the the 275s I have in back. This would prove to be a good place to start doing some mock ups. If it does not look right, then try something else. Taking measurements will help speed up the trial and error process.
Using a panhard has also helped me quite a bit with tire clearance, as well as better cornering.

stang120gt · Nov 30, 2005

cool thanks man

vristang said:
I used a 95 rear in my 90 GT. I did need to use 17x9" wheels with a 24mm offset. to get them to fit. Still not ideal though as the outer fender lip still rubs some times. Then again maybe that is due the the 275s I have in back. This would prove to be a good place to start doing some mock ups. If it does not look right, then try something else. Taking measurements will help speed up the trial and error process.
Using a panhard has also helped me quite a bit with tire clearance, as well as better cornering.

stang120gt · Dec 1, 2005

Does anyone no what the offset is on the 10th anniversary
cobra wheels. Or does anyone no if they will fit on the rear with the wider
sn95 rearend

Thanks

Mustang5L5 · Dec 1, 2005

You could always use the North Cobra brackets and Fox-lenght 5-lug axles to pull the rear track back in to stock Fox offset. Will give you an extra 0.75" to work with

SN 95 Rearend conv. ? Wheel Fitment?

stang120gt

Member

vristang

stang120gt

Member

stang120gt

Member

Mustang5L5

That is…until I whipped out my Bissell

Similar threads

SN 95 Rearend conv. ? Wheel Fitment?

stang120gt

Member

vristang

stang120gt

Member

stang120gt

Member

Mustang5L5

That is…until I whipped out my Bissell

Similar threads

Privacy & Transparency

Privacy & Transparency