sn95 interior installed in fox body

IF ya search, you'll find a couple threads pointing to info on the subject. There's been pics posted a few times throughout the past year or so along with information. Custom harnesses, wiring, etc. was involved, I remember that.

It'd look stupid without the door panels done as well, and without the door panels done then the dash blocks the Fox's door handles. But when putting the door panels on, that's a whole 'nother headache.

do a search for timthe toolman . he did the conversion.i might try it over the winter,teh dash is the same width as a stock dash, its just alot of wiring and bolt problem.

ive seen one on autotrader or ebay before. it was a fox with the sn95 dash, seats and console. looked really good and clean

Yes it has been done, i think the only issue it creates is space around the door handles
ill post a pic as soon as my image host decidest to start working again ...

Welcome Aboard!
I seen that done before!
Anyone have any pics?

Jquintel said:

Yes it has been done, i think the only issue it creates is space around the door handles
ill post a pic as soon as my image host decidest to start working again ...

Click to expand...

If your host doesn't decide to work email them to juliendogg@msn.com with something like sn95fox pics in the subject and i will host them for you.


J.

It will take some work, but with some patience, and a little fiberglass, you should be able to do that, and mold some door panels to bring it all together. I hacked a dash out of a 95 300ZX into an 84 300ZX I used to have, and built door panels for it. That was an absolute pain in the ass, but it was a much bigger difference between the two, and it was still worth it when it was all said and done. Good luck.
Brandon