I noticed a noise in the rear and by the time I went over the speed bumps at the tag office and got over to a friends house this is what it looked like.
Note this is with the car jacked up (when not jacked up the sway bar was two fingers off the ground)
My friend only had a jack and a block of wood. I had to jack it up, put the wood under the sway bar and then drop the jack over and over to bend it back up enough to drive home.
The unbroken side:
The break on the sway bar.
Another unbroken comparisson:
as it stands now without the sway bar:
This is how the sway bar used to sit in front of the rear wheel.
Is there a bar out there that isn't so low? It's a suspension techniques
(or was).