• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

So... when i can see the pistons is that too far?

  • Thread starter Thread starter Stray152
  • Start date Start date Mar 6, 2009
S

Stray152

New Member
Mar 5, 2009
0
0
0
Mar 6, 2009
#1
  • Mar 6, 2009
  • #1
Anyway, ive got this package coming in sometime between now and when i get home with TF heads, intake, TB, Plenum, cams, intake tube, head changing kit and a SCT tuner.

So... i think i can do it myself... with the engine in the car. And people have told me i could. Are we all crazy?.. i mean the way i look at it the hardest part will be degreeing the cams... other than that.. im pretty much taking off all old stuff and putting all new stuff in. (yes i know its much more complicated than that) Im just very comfortable with doing things with my hands, and.. the shop wanted 3K to put it in... i thought that was absurd.

So far ive just been told to assemble the heads w/ the cams and everything before i bolt them up... other than that it seems pretty straight forward. The retailer said that "a shade tree mechanic could do it" but im pretty sure he'd say anything to get me to buy the parts... I really have no money for labor left over so ... its less a matter of "can I", than a matter of "is my car ever going to run again"

If your going to shoot me down tell me what mods you would be comfortable with some one doing themselves so i can have a reference point. I probably already did a few things people would never do themselves...

Thanks guys
 
D

darkside03gt

Member
Feb 19, 2007
851
8
18
Sacramento CA
Mar 6, 2009
#2
  • Mar 6, 2009
  • #2
You should have no problem completing that install. People do heads, cams and intakes all the time. It can be done with the engine still in the car, the drivers side is a little tight though because of the brake booster. Do some research and TAKE YOUR TIME and you will be just fine. Dont get on it after the install untill its dynoed and it will probably run really rough till then too.
 
S

Stray152

New Member
Mar 5, 2009
0
0
0
Mar 8, 2009
#3
  • Mar 8, 2009
  • #3
Will fuel upgrades be necessary for this amount of upgrades?
 

SaleenGT2001

Well-Known Member
Jul 18, 2005
2,811
4
58
Four Oaks NC
Mar 8, 2009
#4
  • Mar 8, 2009
  • #4
your stock fuel system should be just fine. the stock stuff will stand up to a 100 shot so you shouldnt have any issues
 
You must log in or register to reply here.

Similar threads

P
Hello, core supports for '86 vs '90-3, i need some answers if anyone knows
  • Pony Dr.Mike
  • Mar 14, 2026
  • The Welcome Wagon
Replies
7
Views
313
The Welcome Wagon Mar 15, 2026
95steedamustang
A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
745
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
733
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
608
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?