Solid Gas Cap

[65notch]

i want to relocate my gas cap inside my trunk(on my 65 coupe) so that nobody can steal my gas or put something in it. i would like to have a billet style cap on the outside that does do anything, and to fill the tank i would have to open my trunk. has anybody done this or know how i could do this?

 

[12sec67]

i did this,

i left the stock outside cap on and cut the pipe to the tank, went to the junk yard and found a spout that goes straight up and used the rubber sleve to put it together.

you need to get a newer spout that has a vent tube on the side of it, that you could run through the floor of your truck to let out the fuel vapors or you car will smell like gas durring fuel slosh... as me how i know..

 

[65Mustang2+2]

Why not just buy a locking gas cap? The have Mustang ones that have the old style look to them.

 

[BullittFB]

This is a nice setup.
http://www.terlinguaracingteam.com/...ge&image=/gallery_trt_001/trt_001_trunk-L.jpg

 

[65notch]

Why not just buy a locking gas cap? The have Mustang ones that have the old style look to them.

the ones ive seen dont look all that good, and they cost a pretty good amount

 

[LMan]

the ones ive seen dont look all that good, and they cost a pretty good amount

they are more expensive than a billet gas cap that doesn't do anything?

 

[krash kendall]

How about this one?

Flip Cap

 

[65notch]

they are more expensive than a billet gas cap that doesn't do anything?

i just like the style of the billet ones. i was hoping for one around that price that locked. the only locking one looks like crap. hey but thanks for the sarcasm.

 

[12sec67]

NO GAS CAP FOR ME

 

[mustangman70]

Is that a switch any one can buy Or is that custom???

 

[12sec67]

i had a piece of stainless stell cut then mounted a normal battery cut off switch to it. i used stainless steel alan head nuts and dustin (10secgoal) used aluminum with rivits, both look pretty cool