• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Some final wire hiding q's.

  • Thread starter Thread starter fox racer
  • Start date Start date Jan 3, 2006

fox racer

Member
Jun 22, 2004
577
0
16
Staten Island, NYC
Jan 3, 2006
#1
  • Jan 3, 2006
  • #1
Ok, if i dont install my long tubes this weekend, im going to hide wires instead. how do you guys fit the wires in the fender w/o lengthening the wire? i guess you totally remove the harness of all tape and sleeving? this is the only thing that worries me.
 

will1992

Member
Aug 25, 2005
123
0
16
Jan 3, 2006
#2
  • Jan 3, 2006
  • #2
fox racer,
first unplug all of plugs on the main harnesses.next what i had to do to make the wires properly reach inside the fender was,like you said, remove all of the tape from the wiring harness,i used a razor(be careful).next to get the wires into the fender through the rear of the strut you must either enlarge the holes or cut the wires then solder them together inside the fender etc. etc. this is just a summary i would give you a complete description but i dont know if you already know all this. if you need more info just ask or do a search.im sure almoststock will help you as he is the one that has helped me. dont be worried about taking the tape off the wires. it is a little discouraging seeing a ****load of exposed wires, but once you get started youll see it isn't that hard.good luck!
 

ALMOST STOCK

Founding Member
Sep 23, 2000
1,250
41
88
CA.
Jan 4, 2006
#3
  • Jan 4, 2006
  • #3
Sounds easy enough to me WILL


fox racer
This might help also.

click on my sig and take a look at wire hiding.
 

fox racer

Member
Jun 22, 2004
577
0
16
Staten Island, NYC
Jan 4, 2006
#4
  • Jan 4, 2006
  • #4
ALMOST STOCK... i have seen your site, but that link you posted, thats wat i needed! looks like im doin it this weekend now. the site helped, but that link is wat im using. thanks amillion man! thanks you too will!
 
P

PRO50SC

New Member
Dec 28, 2003
1,012
1
0
Olney, Maryland
Jan 4, 2006
#5
  • Jan 4, 2006
  • #5
ALMOST STOCK said:
Sounds easy enough to me WILL


fox racer
This might help also.
http://www.netsnapshot.com/pcw/buildalbum-cgi?ACCOUNT=1924&KEY=7
or click on my sig and take a look at wire hiding.
Click to expand...
Just looked at your site. Incredible. I wish you were my next door neighbor!!! :SNSign:
 

ALMOST STOCK

Founding Member
Sep 23, 2000
1,250
41
88
CA.
Jan 4, 2006
#6
  • Jan 4, 2006
  • #6
fox racer said:
ALMOST STOCK... i have seen your site, but that link you posted, thats wat i needed! looks like im doin it this weekend now. the site helped, but that link is wat im using. thanks amillion man! thanks you too will!
Click to expand...

I'm glady was able to help.
Remember think about where you're going at least twice before you make a move, and you'll find out it's not nearly as hard to do as you thought.

The passenger side is your easiest side, I'd start there first if it were me that way you get a good feel for what you need to do.
 

ALMOST STOCK

Founding Member
Sep 23, 2000
1,250
41
88
CA.
Jan 4, 2006
#7
  • Jan 4, 2006
  • #7
PRO50SC said:
Just looked at your site. Incredible. I wish you were my next door neighbor!!! :SNSign:
Click to expand...

Thanks for the complement on the site, I owe it all to stang22.
We could be neighbors if you're willing to move to Ca.
 
You must log in or register to reply here.

Similar threads

F
Electrical From scratch: alternator wiring
  • fox racer v2
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
0
Views
688
Fox 5.0 Mustang Tech Jun 23, 2025
fox racer v2
F
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
37
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 18, 2026
AeroCoupe
Progress Thread Giving an abandoned 88 GT project a new chance at life
  • jaketractor
  • Jan 9, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
2K
Fox 5.0 Mustang Tech Jul 20, 2025
Noobz347
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
747
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?