fox racer,
first unplug all of plugs on the main harnesses.next what i had to do to make the wires properly reach inside the fender was,like you said, remove all of the tape from the wiring harness,i used a razor(be careful).next to get the wires into the fender through the rear of the strut you must either enlarge the holes or cut the wires then solder them together inside the fender etc. etc. this is just a summary i would give you a complete description but i dont know if you already know all this. if you need more info just ask or do a search.im sure almoststock will help you as he is the one that has helped me. dont be worried about taking the tape off the wires. it is a little discouraging seeing a ****load of exposed wires, but once you get started youll see it isn't that hard.good luck!