SON OF A BISCUIT!!!

dcurtis · May 10, 2009

If you did swap to the standard offset arms it would only pull your wheels back 3/4 of an inch, as that is the difference between the standard and forward offset arms. I think you have other problems, with the k member and the forward offset arms you should only be 1 and 1/2 inches farther forward than stock. Hope you figure out the prob, good luck.

Mustang5L5 · May 10, 2009

That;s what i read too. That looks like a hell of a lot more than 1.5 inches.

It doesn't look right at all.

Stupid question, but are the arms upside down? Can they be flipped over and used that way?

Shaolin Crane · May 10, 2009

Mustang5L5 said:
That;s what i read too. That looks like a hell of a lot more than 1.5 inches.

It doesn't look right at all.

Stupid question, but are the arms upside down? Can they be flipped over and used that way?

No the can only be installed one way on the car, and i think you ment are they on the wrong side, if the were upside down my coil overs would be pointing down

Blandnuts · May 10, 2009

They're being awfully nice on cc. Jack should be able to give some hints on to which arms you have. Your pics looks similar to pics I've seen on cc or corral with kmembers and offset arms. They were also running different size tires. I'll see if I can find that thread.

Fred

Shaolin Crane · May 10, 2009

yeah they are being nice, must be from mothers day or something

GT_Rich · May 11, 2009

You could dismount the tires and then set the rims on the dollies and roll it out.

1991vert · May 11, 2009

do you have the a-arms reversed? like pass side on drivers and drivers on pass? granted the sway bar mount holes would not line up, but maybe you arent running a sway bar? that offset is absolutely crazy

Shaolin Crane · May 11, 2009

i feel like a total tard, i went looking through my invoices to be certain that i had standard offset arms, turns out i got the forward offsets, damn that was a while ago over a year now, anywho at least im getting the car back togethor and i have some serious castor to play with

Mustang5L5 · May 11, 2009

So you gonna stick with them or change them?

dcurtis · May 11, 2009

Standard arms will only move the wheel back 3/4 of an inch, it will give you clearance to move the car but the wheel will still be too far forward it would seem.

Shaolin Crane · May 11, 2009

Mustang5L5 said:
So you gonna stick with them or change them?

im gonna stick with them, it may not look pretty now but its gonna handle bitchen and thats all that really matters, im just gonna buy some fenders that are flared and offset

LiquidGT · May 11, 2009

Shaolin Crane said:
im gonna stick with them, it may not look pretty now but its gonna handle bitchen and thats all that really matters, im just gonna buy some fenders that are flared and offset

I was gonna post earlier and say make some offset fenders as joke; if you did that then the front would be similar to the FR500.

Shaolin Crane · May 11, 2009

LiquidGT said:
I was gonna post earlier and say make some offset fenders as joke; if you did that then the front would be similar to the FR500.

i actually like the way that those look, but damn the are pricey

LiquidGT · May 11, 2009

I believe they only made one FR500, so I guess it would be pricey... or are you talking about the rims?

Shaolin Crane · May 11, 2009

LiquidGT said:
I believe they only made one FR500, so I guess it would be pricey... or are you talking about the rims?

no i ment the similar fenders for the foxes that offset the wheel hole

Mustang5L5 · May 11, 2009

They have those?

Shaolin Crane · May 12, 2009

Mustang5L5 said:
They have those?

yeah and they are expensive

stykthyn · May 12, 2009

Shaolin Crane said:
yeah and they are expensive

linkey?

Shaolin Crane · May 12, 2009

Inertia Sport Maier Racing Fender Flares for the Mustang Coupe

Mustang5L5 · May 12, 2009

Damn, $640/pair!

SON OF A BISCUIT!!!

dcurtis

Mustang5L5

That is…until I whipped out my Bissell

Shaolin Crane

Banned

Blandnuts

I don't swallow; I only swoosh

Shaolin Crane

Banned

GT_Rich

Member

1991vert

Shaolin Crane

Banned

Mustang5L5

That is…until I whipped out my Bissell

dcurtis

Shaolin Crane

Banned

LiquidGT

Member

Shaolin Crane

Banned

LiquidGT

Member

Shaolin Crane

Banned

Mustang5L5

That is…until I whipped out my Bissell

Shaolin Crane

Banned

stykthyn

I want to measure mine. It doesn't look that tall.

Shaolin Crane

Banned

Mustang5L5

That is…until I whipped out my Bissell

Similar threads

SON OF A BISCUIT!!!

That is…until I whipped out my Bissell

Banned

I don't swallow; I only swoosh

Banned

Member

Banned

That is…until I whipped out my Bissell

Banned

Member

Banned

Member

Banned

That is…until I whipped out my Bissell

Banned

I want to measure mine. It doesn't look that tall.

Banned

That is…until I whipped out my Bissell

Similar threads

Privacy & Transparency

Privacy & Transparency