• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Speedo Driven Gear Questions

  • Thread starter Thread starter 87hd
  • Start date Start date Feb 24, 2006
8

87hd

New Member
Feb 19, 2006
6
0
0
Feb 24, 2006
#1
  • Feb 24, 2006
  • #1
Alright, this has me a little anoyed. I just crawled out from under my 93 GT after installing a black 20 tooth driven gear. When I bought the car last Saturday, I noticed the speedo was off maybe 10mph at around 70. When I checked yesterday I found 3:55 gears in it (I jacked it up and marked the driveshaft and spun the rear wheels one turn) the driveshaft made almost exactly 3 and a half turns. I looked in the motorsports book and it says, black 20 tooth driven gear. What disturbs me is that's what was in there! I counted the teeth on both gears. They are the same. According to my speedo I'm doing 70mph at 2000rpm in fifth. If this is true, why are blue hairs in buicks passing me by and the cops not bothering me in a 55 zone?
 
S

ss93cobra

Founding Member
Apr 10, 2002
1,422
1
0
Wilmington NC
Feb 24, 2006
#2
  • Feb 24, 2006
  • #2
You're going to have to have a buddy pace you to find out exactly how far off your speedo is, and buy a different gear according to that.
 
8

87hd

New Member
Feb 19, 2006
6
0
0
Feb 24, 2006
#3
  • Feb 24, 2006
  • #3
I figured it out!

Factory Five racing has a forum for thier cobra tech and I found the answer there. Since they use mostly mustang stuff in thier cars and most people end up changing rear end gears (like the rest of us) someone came up with a chart. It seems Ford in thier infinite wisdom changed to a 8 tooth drive gear from part year in 1990. What this means is there is no driven gear available if you go above 3.27 gears. 21 tooth is the highest from ford. Mustang unlimited sells an aftermarket 23 tooth (what I need) that works for 90-94 with 3.45 or 3.55 gears or 89 back (T-5 only) with 3.73 or 4.10s. My only other choice is to pull the trans, remove the tail shaft and replace the drive gear with a earlier model 7 tooth. I'm going to try it and see, I did see some comments stating the 23 tooth gear did not last a long time. I hope it works for me.
 

timewarped1972

Member
Jun 17, 2004
642
0
16
mesa, az
Feb 24, 2006
#4
  • Feb 24, 2006
  • #4
i thought that was for 3.55 gears?? meaning, they changed the drive teeth in the tranny in 90.......but it should accomodate up to 355 gear speedo tooth........you sure you dont maybe have diff gears in the rear?? i thought they switched to a 6 tooth not an 8....maybe not........but according to the catalog i have here.......a 3.55 rear gear they make a speedo gear for 90-up 3.55.........it's usually the 373's where people run into trouble... are you positive it's the original 93 tranny??

what tires you running??........the gear you have should work.......thats just weird...
 
8

87hd

New Member
Feb 19, 2006
6
0
0
Feb 24, 2006
#5
  • Feb 24, 2006
  • #5
timewarped1972 said:
i thought that was for 3.55 gears?? meaning, they changed the drive teeth in the tranny in 90.......but it should accomodate up to 355 gear speedo tooth........you sure you dont maybe have diff gears in the rear?? i thought they switched to a 6 tooth not an 8....maybe not........but according to the catalog i have here.......a 3.55 rear gear they make a speedo gear for 90-up 3.55.........it's usually the 373's where people run into trouble... are you positive it's the original 93 tranny??

what tires you running??........the gear you have should work.......thats just weird...
Click to expand...

I'm sure I have 3.55 gears, I checked. i would have agreed with you prior to today. I thought the same thing. The black 20 tooth should be the right gear. But, it's not. The last one I did this to was an 89 so it worked fine. Ford Motorsports 2006 catalog says the same thing, an 8 tooth drive gear for 90 up. Check the FFR FAQ, they explain it quite well. http://www.ffcobra.com/FAQ/speedo.html

Just when I was thinking I knew all there was to know about the Fox body...

I guess we learn something every day...
 

timewarped1972

Member
Jun 17, 2004
642
0
16
mesa, az
Feb 24, 2006
#6
  • Feb 24, 2006
  • #6
so there's a 6,7,and 8 tooth..hmmmm, interesting...so does that mean 90 and up could have one of two diff drive gears?? i know they changed the drive gear in 90 but their supposed to have speedo gears that work with that up to 3,55..unless there's a thrid drive gear.. i'm still trying to figure out what the purpose of ford changing it was to begin with...........
 

Saleen0679

10 Year Member
Apr 14, 2005
876
24
49
Yakima, WA
Feb 24, 2006
#7
  • Feb 24, 2006
  • #7
87hd said:
I'm sure I have 3.55 gears, I checked. i would have agreed with you prior to today. I thought the same thing. The black 20 tooth should be the right gear. But, it's not. The last one I did this to was an 89 so it worked fine. Ford Motorsports 2006 catalog says the same thing, an 8 tooth drive gear for 90 up. Check the FFR FAQ, they explain it quite well. http://www.ffcobra.com/FAQ/speedo.html

Just when I was thinking I knew all there was to know about the Fox body...

I guess we learn something every day...
Click to expand...

As you found out a 90-93 5 speed w/3.55 needs a 23 tooth (white) driven gear. Someone somewhere was asking about speedo gears yesterday and linked to a nice site with good information. The site even had part numbers for Jeep speedo gears that could be used to get the speedo close. Unfortunately I didn't pay enough attention to warrant bookmarking the site. I'll have to see if I can find it again.

Edit: Here's the site: http://www.geocities.com/mgnedell/notchback/tech/speedo.html
Guys are saying the gear is available at the local Jeep dealer.
 

timewarped1972

Member
Jun 17, 2004
642
0
16
mesa, az
Feb 24, 2006
#8
  • Feb 24, 2006
  • #8
oh man...........ok, i looked at the wrong listing.....thats why i have been confusing myself.........doh

its different from 90 up..........also diff between aod and t-5........it is the 23 tooth white gear you need not the black...........i shoulda caught that........likei said i looked at the wrong listing........someone the other day asked a similar question i think they had the older tranny......

it clearly says ( when i'm paying attention, lol) 90 to 93 manual 5 speed, 3,55 gear, 23 tooth white......#lrs-17271d ( www.50resto ) part number....

also......i'm guessing with the drive gear in the tranny the 89 and older aod came with a 6 tooth drive gear, the t-5 came with the 7 tooth, and after 90 they both came with the 8 tooth.......not positive on that one though..
 

squeeeg

Founding Member
Jul 4, 2000
1,905
0
0
Michigan
Feb 24, 2006
#9
  • Feb 24, 2006
  • #9
tech.stangnet.com

There is a chart to look up what gear you need.
 
You must log in or register to reply here.

Similar threads

Drivetrain At my Witts end Speedo gear ‘NEVER MIND’
  • Aoneill5.0
  • Dec 17, 2022
  • Fox 5.0 Mustang Tech
Replies
6
Views
1K
Fox 5.0 Mustang Tech Dec 18, 2022
Aoneill5.0
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Took some pics, i do really own a mustang...
  • 2000xp8
  • Jun 20, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 6 7 8
Replies
148
Views
21K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 1, 2024
Mustang5L5
C
Which speedo gears to put after a 3.73 gears on a 98 GT?
  • Chiper91
  • Jan 21, 2020
  • SN95 4.6L Mustang Tech
Replies
5
Views
7K
SN95 4.6L Mustang Tech Jan 21, 2020
kiddiccarus
Could not pass this up .. guess the AOD is out
  • mikestang63
  • Jun 1, 2021
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 7, 2024
FastDriver
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?