• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-

Steeda Springs??

  • Thread starter Thread starter McQueens Dream
  • Start date Start date Jun 9, 2012

McQueens Dream

Member
Apr 18, 2006
260
7
18
Winston Salem, NC
Jun 9, 2012
#1
  • Jun 9, 2012
  • #1
ok, had Steeda Ultra Lite springs installed by my local dealer wednesday on my wife's '12 V6. overall happy with the front drop, but the rear just still seems like it sits too high for a "lowered" mustang. granted, i'm used to doing 2" drops on other mustangs and these are advertised to lower the front 1.25" and the rear 1.5". while the car looks 100% better than the factory 4wd look, it still looks like it could be lower. with our factory wheels the car doesn't look as good as it should in my opinion. so new wheels and tires are ordered and just awaiting arrival. anybody else with similar results on Steeda springs? also, the front sits level at 28" from the ground but the rear sits at 29" from the ground on the passenger side and 28 3/4" on the driver's side. these measurements are taken from a level garage floor with no one or anything in the car. unfortunately i didn't measure it before the springs...
 
S

SteedaBrandon

Premium Sponsor
Feb 14, 2012
376
6
28
Jun 11, 2012
#2
  • Jun 11, 2012
  • #2
McQueens Dream said:
ok, had Steeda Ultra Lite springs installed by my local dealer wednesday on my wife's '12 V6. overall happy with the front drop, but the rear just still seems like it sits too high for a "lowered" mustang. granted, i'm used to doing 2" drops on other mustangs and these are advertised to lower the front 1.25" and the rear 1.5". while the car looks 100% better than the factory 4wd look, it still looks like it could be lower. with our factory wheels the car doesn't look as good as it should in my opinion. so new wheels and tires are ordered and just awaiting arrival. anybody else with similar results on Steeda springs? also, the front sits level at 28" from the ground but the rear sits at 29" from the ground on the passenger side and 28 3/4" on the driver's side. these measurements are taken from a level garage floor with no one or anything in the car. unfortunately i didn't measure it before the springs...
Click to expand...
The problem is that each car comes from the factory a little different (in terms of ride height). That's why we say that the drop is approximately 1.5" (R). It won't be exactly the same on every car as every car sits at a different ride height from the factory.

Basically, the springs should lower it approximately those heights which will make the car look almost level (it has a very slight rake stance to it). If you do it exactly level it will actually 'look' like the front is slightly higher.
 

McQueens Dream

Member
Apr 18, 2006
260
7
18
Winston Salem, NC
Jun 11, 2012
#3
  • Jun 11, 2012
  • #3
actually after driving it this past weekend the springs have "settled" a little bit and it looks very nice!! parked next to a stock height stand and ours is definitely lower. and looks way better to boot!!!! very nice springs and super happy with the final results.
 
Reactions: SteedaBrandon
S

SteedaBrandon

Premium Sponsor
Feb 14, 2012
376
6
28
Jun 12, 2012
#4
  • Jun 12, 2012
  • #4
McQueens Dream said:
actually after driving it this past weekend the springs have "settled" a little bit and it looks very nice!! parked next to a stock height stand and ours is definitely lower. and looks way better to boot!!!! very nice springs and super happy with the final results.
Click to expand...
Glad to hear you are satisfied!
 
You must log in or register to reply here.

Similar threads

Suspension Is somethig Wrong Here?
  • Icemanxxxv
  • Jul 11, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
180
Fox 5.0 Mustang Tech Jul 11, 2026
AeroCoupe
N
Fox Street Suspension Build Advice
  • NYFox
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
376
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 28, 2026
Noobz347
S
Suspension Spring I.D. help?
  • Scott_S
  • Aug 21, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
221
Fox 5.0 Mustang Tech Aug 21, 2025
Scott_S
S
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
37
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 18, 2026
AeroCoupe
J
For Sale MASTER LISTING: Abandoned '66 Mustang Restomod Part-Out (Wilwood, Ididit, Quick Performance, Mishimoto)
  • JasonB66
  • Jul 23, 2026
  • Suspension
Replies
0
Views
229
Suspension Jul 23, 2026
JasonB66
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?