• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Stock 1986 5.0.. powertrain into 74-75 1/2 ton?

  • Thread starter Thread starter Devo
  • Start date Start date Apr 24, 2008
D

Devo

New Member
Sep 21, 2006
4
0
0
Apr 24, 2008
#1
  • Apr 24, 2008
  • #1
Hey guys,
I've had a 1986 5.0 t-tops car sitting around with a blown bearing cap... 131,000km on the car. I also have my 85 5.0 so i don't really have much use for this stock fuel injected set-up. Then i found a couple of nice trucks that turned out to be free and my i would like to drop the FI 5.0 into the truck. I have two questions..

Would you use the 86 bw t-5 or an auto?

And what would i have to switch over from the mustang to the truck? Basically everthing under the hood? or do i have to use the trucks power steering pump and such?

I'm kinda stumped..
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Apr 25, 2008
#2
  • Apr 25, 2008
  • #2
If you could get a hold of the truck's accessories, that would make life the easiest. If there's enough clearance, using the Mustang stuff wouldn't hurt and would probably be fairly straightforward. You might need to find a way to adapt the power steering lines to the truck, if they're different. Some equipment shops could probably make you some hydraulic lines with the correct fittings, if you needed to go that route. From there, you'll need to swap all of the EEC related wiring over to the truck, and probably have an exhaust shop fab something up in the way of an exhaust, adding some O2 sensor bungs in the process, in order to be ready for the EFI. If you'd like, I could move this to Classic Tech, since those guys are honestly going to have the most experience in swapping an EFI setup into a car that never had it as an option, so they'll probably be able to offer more advice than myself.
 

85ragtop

BTW, I like dudes.
10 Year Member
Nov 29, 1999
823
475
123
NC
Apr 25, 2008
#3
  • Apr 25, 2008
  • #3
Moving this to 5.0 tech.
Moved to tech.
 

Maryland Stang

Active Member
Aug 21, 2002
1,656
30
39
Greenville, NC
Apr 25, 2008
#4
  • Apr 25, 2008
  • #4
Before I tell you which tranny I'd use let me ask you a question. Are you ever going to tow with this truck? Any kind of heavy usage requires an auto.
 
5

5.0ina66

Member
Jun 6, 2003
664
0
16
Ohio
Apr 26, 2008
#5
  • Apr 26, 2008
  • #5
Maryland Stang said:
Before I tell you which tranny I'd use let me ask you a question. Are you ever going to tow with this truck? Any kind of heavy usage requires an auto.
Click to expand...

Huh? I don't get it. Several of my friends are in the construction business, they don't seem to have any problems towing 14,000lbs and more with their 6spd powerstrokes, and most people I know that tow would rather have a stick anyway. Granted a T5 isn't made for that kind of abuse but I don't get the logic here.
 

Maryland Stang

Active Member
Aug 21, 2002
1,656
30
39
Greenville, NC
Apr 27, 2008
#6
  • Apr 27, 2008
  • #6
5.0ina66 said:
Huh? I don't get it. Several of my friends are in the construction business, they don't seem to have any problems towing 14,000lbs and more with their 6spd powerstrokes, and most people I know that tow would rather have a stick anyway. Granted a T5 isn't made for that kind of abuse but I don't get the logic here.
Click to expand...


Because there isn't a clutch available that'll fit behind a 5.0 (truck or car) that will take towing abuse on a regular basis. The tow ratings for all manual F-150's ever since way back (before 1980) is substantially lower than the automatic ratings. Throw on a 4 wheel drive and you could probably pull more with a automatic Yugo.

A F-350 Powerstroke is not a 5.0 F-150. Not even close. The frames are different, the clutch is way different and the intended uses are different.

Just check the towing specs for yourself if you don't believe me. BTW, I tow a lot with an F-150 and I know a lot of other people who do too. I REGULARLY (as in every day) pull a 6,000 pound trailer behind a modified for towing 1995 5.0 F-150. This kind of abuse will kill a clutch quick. I've seen it happen a lot.
 

samickguy15

Member
Sep 1, 2005
404
0
16
Delavan, IL
Apr 28, 2008
#7
  • Apr 28, 2008
  • #7
I agree with Maryland. If you want to tow often or tow anything heavy, find either a C-4 or small block C-6. If it's just a cruiser or toy, run the T-5. Be cautioned though that shifter placement may not be optimal.

I would run the trucks accesories and whatever you want for intake, exhaust, etc. Should be a cake walk if the truck already has a 302 in it...
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
922
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
G
Fuel Stock 1994 5.0 throttle body size
  • GOvert
  • Mar 15, 2024
  • Fox 5.0 Mustang Tech
Replies
10
Views
4K
Fox 5.0 Mustang Tech May 1, 2025
95gt1985
9
For Sale Borg Warner WC T5, Stock Bell Housing, RAM Clutch Set, Double Hump Cross Member, & Pro 5.0 Shifter
  • AeroCoupe
  • Aug 9, 2025
  • Drivetrain Parts
Replies
1
Views
630
Drivetrain Parts Dec 26, 2025
AeroCoupe
3
94 Gt to 84 Fox
  • 351C-84'Fox
  • May 16, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 17, 2024
351C-84'Fox
3
A9L on 94 engine, no priming injector pulse?
  • Wallyman
  • Jun 17, 2024
  • Other Auto Tech
Replies
11
Views
1K
Other Auto Tech Jun 24, 2024
Wallyman
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?