• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Stock Axels?

  • Thread starter Thread starter FordGuy88
  • Start date Start date May 8, 2006
F

FordGuy88

New Member
Nov 15, 2004
241
0
0
Park Ridge, IL
May 8, 2006
#1
  • May 8, 2006
  • #1
I was wondering what kind of power will stock axles hold? Also how about the stock drive shaft? Would you guys sugest getting a FMS aluminum drive shaft? My buddy and me are building a Mustang with a 331 heads and cam car with a C4 and a 2800 stall converter. Stock rear end. will stock axles and drive shaft hold up? Car will be on slicks and skinnies.

Thanks
 
L

llwood

New Member
Feb 19, 2006
39
0
0
May 8, 2006
#2
  • May 8, 2006
  • #2
generally speaking stock axles and real power dont get along to well with slicks but its kinda hit and miss. Some people can run 10's with them and some break turning 13's so... As far as the DS goes for about 250 i would replace it anyway it helps with rotational mass and all that.
 

nvrenuff

Member
Apr 9, 2006
32
0
6
Red Deer, Alberta
May 9, 2006
#3
  • May 9, 2006
  • #3
With that engine, your gonna want to upgrade your axles if your running on slicks. The two guys I have seen at the track break stock axles were both pulling 12.4s in the 1/4, I was doing around 12.5-12.6 and never broke mine, maybe I was lucky, I dunno, but snapping them was inevitable on slicks. I just finished installing 31spline Mosers. As for the driveshaft, it isn't necessary to replace it if your concern is durability, like said earlier though, it does reduce rotational mass a bit. For me, the cost of an aluminum driveshaft isn't worth it yet, bang for the buck, my money goes somewhere else for now.
 

onefstsnake

New Member
Nov 25, 2005
792
1
0
Northern VA
May 9, 2006
#4
  • May 9, 2006
  • #4
Dont Cheap out! lol

I broke my stock drivers side axle w/ a mostly stock car. Just full exhaust, pulleys and a 76mm MAF...
I was running MT Drag Radials (not slicks)

I am upgrading to 31 Spline Moser Axles and an Auburn Pro Locker.

If you do decide to run the car w/ stock axles and slicks I HIGHLY suggest leaving the line at 2500rpm or even at idle...

You never know how the car was driven before you owned it...

As for the FMS Driveshaft, Get it! It will help with drivetrain vibrations and it wont snap as easily. I love mine.


Hope this helps.
Ken
 
F

FordGuy88

New Member
Nov 15, 2004
241
0
0
Park Ridge, IL
May 9, 2006
#5
  • May 9, 2006
  • #5
Thanks a lot guys.
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
May 9, 2006
#6
  • May 9, 2006
  • #6
I highly recommend the Al driveshaft myself...those stock u-joints suck.
 
You must log in or register to reply here.

Similar threads

N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
347
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
503
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
Ford truck engine swap issues
  • keel
  • Jul 7, 2026
  • Other Auto Tech
Replies
17
Views
785
Other Auto Tech Jul 13, 2026
General karthief
9
Forced Induction Prepping for supercharger on non-stock build
  • 91fox427
  • Nov 25, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
603
Fox 5.0 Mustang Tech Jan 5, 2026
Qtrhrse23
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?