• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Strange starting problem

  • Thread starter Thread starter 1990_LX
  • Start date Start date Nov 9, 2008
1

1990_LX

Member
Oct 23, 2008
38
0
6
Nov 9, 2008
#1
  • Nov 9, 2008
  • #1
I have a 1990 lx and I couldn't get it to start so I decided to try replacing the starter solenoid (it was bad anyways and one of the poles was snapped off) and see if that was the problem. Well having said that, I followed both the instructions which came with it and the manual and went to start it and now it keeps turning over with out stopping...regardless of if the key is in the ignition or not. Please help!
 

5.0Droptop

...all those nights we shared, and you're a dude??
Special Agent Mukity-Muck Whats in Charge Round Here
May 15, 2002
1,785
1,130
233
Indiana
Nov 9, 2008
#2
  • Nov 9, 2008
  • #2
you wired something wrong or the solenoid got stuck. Try whacking it with a screwdriver handle and see if it shuts off.
 
1

1990_LX

Member
Oct 23, 2008
38
0
6
Nov 9, 2008
#3
  • Nov 9, 2008
  • #3
yeah, i disconnected it, then re connected it following the direction exactly and it does the same thing....any other opinions?
 
1

1990_LX

Member
Oct 23, 2008
38
0
6
Nov 9, 2008
#4
  • Nov 9, 2008
  • #4
I tried reconnecting the battery and it does the same thing, keeps trying to start with out the key in the ignition. When I whacked the solenoid a few times it stopped...then I tried it again and it got stuck again...wtf?
 

MahFiVeOh

Founding Member
Apr 26, 2002
531
9
49
Ontario, Canada
Nov 9, 2008
#5
  • Nov 9, 2008
  • #5
Bad ground? Might want to check that out.
 
1

1990_LX

Member
Oct 23, 2008
38
0
6
Nov 9, 2008
#6
  • Nov 9, 2008
  • #6
k, ill check that.
 

5.0Droptop

...all those nights we shared, and you're a dude??
Special Agent Mukity-Muck Whats in Charge Round Here
May 15, 2002
1,785
1,130
233
Indiana
Nov 9, 2008
#7
  • Nov 9, 2008
  • #7
replace the solenoid it sounds like a defective one.
 
1

1990_LX

Member
Oct 23, 2008
38
0
6
Nov 9, 2008
#8
  • Nov 9, 2008
  • #8
ok, im going to switch the one I got tomorrow and see how that works out.
 
You must log in or register to reply here.

Similar threads

Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
252
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
G
Resolved Please help! (starting issue)
  • Ghoste
  • May 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
478
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 11, 2025
Ghoste
G
T
Electrical 1990 Vert starting/Solenoid issues
  • Tom77
  • Apr 18, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
394
Fox 5.0 Mustang Tech Apr 18, 2025
85GTStangGuy
S
Need help and Advise - 89 Problem Child
  • Sheela
  • Oct 28, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
160
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 28, 2025
evintho
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?